Related Questions

In a marine flange coupling, the thickness of flange is taken as
A $$\frac{{\text{d}}}{2}$$
B $$\frac{{\text{d}}}{3}$$
C $$\frac{{3{\text{d}}}}{4}$$
D $$\frac{{\text{d}}}{4}$$
Rivets connecting flange angles to cover plates in a plate girder are subjected to
A Horizontal shear only
B Vertical load only
C Both (A) and (B)
D None of the above
Metal sleepers are superior to wooden sleepers with respect to
A cost
B life
C track circuiting
D fastening
Please _____ sure your seat belt is fastened for take off .
A get
B make
C keep
D be
A body of mass 500 g is fastened to one end of steel with of length 2 m and area of cross-section 2 mn2, It the breaking stress of the wire is 1.25 x 10/7, then the maximum angular velocity with which the body can be rotated in a horizontal circle is:
A 2rad/s
B 3 rad/2
C 4 rad/s
D 5 rad/s
In D.C. generators the pole shoes are fastened to the pole core by
A Rivets
B Counter sunk screws
C Brazing
D Welding
In a flange coupling, the bolts are subjected to
A Tensile stress
B Compressive stress
C Shear stress
D None of these
In which country was flange wheel invented?
A Germany
B Japan
C Europe
D Russia
A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis
A Remains within the flange
B Remains below the slab
C Coincides the geometrical centre of the beam
D None of these
A part of the slab may be considered as the flange of the T-beam if
A Flange has adequate reinforcement transverse to beam
B It is built integrally with the beam
C It is effectively bonded together with the beam
D All the above

Next steps