Related Questions

When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as ________ double cover butt joint.
A Single riveted
B Double riveted
C Multi riveted
D None of these
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as _______ double cover butt joint.
A Single riveted
B Double riveted
C Both (A) and (B)
D None of these
The sleepers resting directly on girder are fastened to the top flange of girder by
A hook bolts
B dog spikes
C fang bolts
D rail screws
If the rivets in adjacent rows are staggered and the outermost row has only one rivets, the arrangement of the rivets is called
A Chain riveting
B Zigzag riveting
C Diamond riveting
D Crisscross riveting
When two plates are butt together and riveted with cover plates with two rows of rivets, the joint is known as
A Lap joint
B Butt joint
C Single riveted single cover butt joint
D Double riveted double cover butt joint
In leaf springs, the maximum bending stress developed in the plates is (where W = Load acting on the spring, $$l$$ = Span of the spring, n = Number of plates, b = Width of plates and t = Thickness of plates)
A $$\frac{{{\text{W}}l}}{{{\text{nb}}{{\text{t}}^2}}}$$
B $$\frac{{3{\text{W}}l}}{{2{\text{nb}}{{\text{t}}^2}}}$$
C $$\frac{{2{\text{W}}l}}{{{\text{nb}}{{\text{t}}^2}}}$$
D $$\frac{{3{\text{W}}l}}{{{\text{nb}}{{\text{t}}^2}}}$$
When one plate overlaps the other and the two plates are riveted together with two rows of rivets, the joint is known as
A Single riveted lap joint
B Double riveted lap joint
C Double riveted single cover butt joint
D Double riveted double cover butt joint
The pull required to tear off the plate per pitch length is (where p = Pitch of rivets, t = Thickness of plates and $${\sigma _{\text{t}}},\,\tau $$  and $${\sigma _{\text{c}}}$$ = Permissible tensile, shearing and crushing stresses respectively)
A $$\left( {{\text{p}} - 2{\text{d}}} \right){\text{t}} \times {\sigma _{\text{c}}}$$
B $$\left( {{\text{p}} - {\text{d}}} \right){\text{t}} \times \tau $$
C $$\left( {{\text{p}} - {\text{d}}} \right){\text{t}} \times {\sigma _{\text{t}}}$$
D $$\left( {2{\text{p}} - {\text{d}}} \right){\text{t}} \times {\sigma _{\text{t}}}$$
Minimum thickness of web in a plate girder, when the plate is accessible and also exposed to weather, is
A 5 mm
B 6 mm
C 8 mm
D 10 mm
পাত-দূরত্ব d এবং ধারকত্ব C. এমন একটি সমান্তরাল পাত ধারকের পাত দুটির মাঝখানে d/2 পুরুত্ববিশিষ্ট একটি ধাতব পাত স্থাপন করা হলো। নতুন ধারকত্ব কত হবে? (A metal plate of thickness d/2 is inserted between the plates of a parallel plate capacitor with plate separation d and capacitance C. What is the new capacitance?)
A C/d
B C/2
C 4Cd
D 2c

Next steps