Related Questions

The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is
To constitute false imprisonment
1. The detention must be unlawful.
2. The period for which detention continues is material.
3. The period for which detention continues is immaterial.
4. The knowledge of the plaintiff about his detention is material.
Select the correct answer using the given below:
The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is
A tank has a leak which would empty the completely filled tank in 10 hours. If the tank is full of water and a tap is opened which admits 4 litres of water per minutes in the tank, the leak takes 15 hours to empty the tank. how many litres does the tank hold?
A tank has a leak which would empty the completely filled tank in 10 hours. If the tank is full of water and a tap is opened which admits 4 litres of water per minute in the tank , the leak takes 15 hours to empty the tank. How many litres of water does the tank hold?
Septic tank is a
(i) Settling tank
(ii) Digestion tank
(iii) Aeration tank
A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index is 4.5, the volume fraction of solids in the suspension is
The detention time of a circular tank of diameter d and water depth H, for receiving the sewage Q per hour, is
when a cylindrical tank is filled with water at a rate of 22 cubic meters per hour, the level of water in the tank rises at a rate of 0.7 meters per hour which of the following best approximates the radius of the tank in meters?
A rectangular tank is moving horizontally in the direction of its length with a constant acceleration of 4.5 m/s2.The length, width and depth of tank are 7 m, 3m, 2.5m respectively. If tank is open at the top then calculate the total force due to water acting on higher pressure end of the tank.