Related Questions

The additional piles which are driven to increase the capacity of supporting loads on vertical piles, are known
A Construction piles
B Raking piles
C Eccentric piles
D Sinking piles
The frictional torque transmitted in a flat pivot bearing, considering uniform wear, is (where μ = Coefficient of friction, W = Load over the bearing and R = Radius of bearing surface)
A $$\frac{1}{2}$$μWR
B $$\frac{2}{3}$$μWR
C $$\frac{3}{4}$$μWR
D μWR
When the bearing is subjected to large fluctuations of load and heavy impacts, the bearing characteristic number should be _________ the bearing modulus.
A 10 times
B 5 times
C 15 times
D 20 times
If p = bearing pressure on projected bearing area, Z = absolute viscosity of lubricant and N = speed of journal, then the bearing characteristic number is given by
A $$\frac{{{\text{ZN}}}}{{\text{p}}}$$
B $$\frac{{\text{p}}}{{{\text{ZN}}}}$$
C $$\frac{{\text{Z}}}{{{\text{pN}}}}$$
D $$\frac{{\text{N}}}{{{\text{Zp}}}}$$
In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be
A less than 300 mm
B between 300 mm and 750 mm
C between 750 mm and 1 m
D greater than 1 m
The capacity of computer memory is increasing exponentially . At the same time increased capacity is becoming available at cheaper rate. Two years ago 1GB RAM cost TK. 5,000. Now 4GB Ram is available at the same price. If this trend continues what capacity of RAM will you get for TK. 5,000 after 3 years time ?
A 32GB
B 80GB
C 60.72GB
D 76GB
Ahmad has containers of two different sizes. The total capacity of 16 containers of one size is x gallons,and the total capacity of 8 containers of the other size is also x gallons , and x> 0. In terms of x , what is the capacity, in gallons, of each of the larger containers?
A 4x
B 2x
C x/2
D x/8
In a boundary lubricated bearing, there is a __________ of lubricant between the journal and the bearing.
A Thick film
B Thin film
C Either A or B
D None of these
The type of bearing plate used in all joints and on curves to give better bearing area to the rails is
A flat mild steel bearing plate
B mild steel canted bearing plate
C cast iron anti creep bearing plate
D none of the above
In a ball bearing, ball and bearing forms a
A Turning pair
B Rolling pair
C Screw pair
D Spherical pair

Next steps