Related Questions

If the rivets in adjacent rows are staggered and the outermost row has only one rivets, the arrangement of the rivets is called
A Chain riveting
B Zigzag riveting
C Diamond riveting
D Crisscross riveting
According to I.B.R., the distance between the rows of rivets, for equal number of rivets in more than one row for lap joint or butt joint (chain riveting) shall not be less than
A d
B 1.5 d
C 2 d
D 2.5 d
As compared to field rivets, the shop rivets are
A Stronger
B Weaker
C Equally strong
D Any of the above
When the belt is stationary, it is subjected to some tension known as initial tension. The value of this tension is equal to the
A tension in the tight side of the belt
B tension in the slack side of the belt
C sum of the tensions on the tight side and slack side of the belt
D average tension of the tight side and slack side of the belt
Pitch of tacking rivets, when double angles connected back to back and acting as tension members should not be more than
A 500 mm
B 600 mm
C 1000 mm
D 300 mm
Tearing resistance required to tear off the plate per pitch length is (where p = Pitch of rivets, d = Dia. of rivet hole and $${\sigma _{\text{t}}}$$ = Permissible tensile stress for plate material)
A $${\text{pd}}{\sigma _{\text{t}}}$$
B $${\text{pt}}{\sigma _{\text{t}}}$$
C $$\left( {{\text{p}} - {\text{d}}} \right){\sigma _{\text{t}}}$$
D $$\left( {{\text{p}} - {\text{d}}} \right){\text{t}}{\sigma _{\text{t}}}$$
The pull required to tear off the plate per pitch length is (where p = Pitch of rivets, t = Thickness of plates and $${\sigma _{\text{t}}},\,\tau $$  and $${\sigma _{\text{c}}}$$ = Permissible tensile, shearing and crushing stresses respectively)
A $$\left( {{\text{p}} - 2{\text{d}}} \right){\text{t}} \times {\sigma _{\text{c}}}$$
B $$\left( {{\text{p}} - {\text{d}}} \right){\text{t}} \times \tau $$
C $$\left( {{\text{p}} - {\text{d}}} \right){\text{t}} \times {\sigma _{\text{t}}}$$
D $$\left( {2{\text{p}} - {\text{d}}} \right){\text{t}} \times {\sigma _{\text{t}}}$$
Poppy flipped a coin three times and got heads each time. What is the probability that she gets heads on the next flip?
A 1
B 1/4
C 1/2
D 1/3
Jennifer flipped a coin three times and got heads each time. What is the probability that she gets heads on the next flip?
A 1
B 1/16
C 1/2
Apex angle of conical heads used in the bottom heads of chemical process equipments is usually
A 30°
B 45°
C 60°
D 75°

Next steps