Related Questions

If the main reinforcement of the slab is parallel to a T-beam, the transverse reinforcement at mid span of the slab is provided at least __________ of main reinforcement.
A 40%
B 50%
C 60%
D 70%
If ‘H’ is the overall height of a retaining wall retaining a surcharge, the width of the base slab usually provided, is
A 0.3 H
B 0.4 H
C 0.5 H
D 0.7 H
If A is the area of the foundation of a retaining wall carrying a load W and retaining earth of weight 'w' per unit volume, the minimum depth (h) of the foundation from the free surface of the earth, is
A $${\text{h}} = \frac{{\text{W}}}{{{\text{Aw}}}}\left$$
B $${\text{h}} = \frac{{\text{W}}}{{{\text{Aw}}}}\left$$
C $${\text{h}} = \frac{{\text{W}}}{{{\text{Aw}}}}{\left^2}$$
D $${\text{h}} = \sqrt {\frac{{\text{W}}}{{{\text{Aw}}}}} {\left^2}$$
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খন্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডতির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
A 4 cm
B 6 cm
C 9 cm
D 12 cm
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খণ্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডটির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
A 4 cm
B 6 cm
C 9 cm
D 12 cm
A ladder is resting against a vertical wall and its bottom is 2.5 m away from the wall. If it slips 0.8 m down the wall, then its bottom will move away from the wall by 1.4 m. What is the length of the ladder?
A 6.2 m
B 6.5 m
C 6.8 m
D \7.5 m
In a counterfort retaining wall, the main reinforcement in the stem at mid span is provided on
A Front face only
B Inner face only
C Both front face and inner face
D None of the above
The main reinforcement in the heel of a T-shaped R.C. retaining wall is provided on
A Top face perpendicular to wall
B Bottom face perpendicular to wall
C Both top and bottom faces perpendicular to wall
D None of the above
The thickness of base slab of a retaining wall generally provided, is
A One half of the width of the stem at the bottom
B One third of the width of the stem at the bottom
C One fourth of the width of the steam at the bottom
D Width of the stem at the bottom
The design of heel slab of a retaining wall is based on the maximum bending moment due to:
A Its own weight
B Weight of the soil above it
C Load of the surcharge, if any
D All the above

Next steps