Related Questions

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of portland cement. The component of Portland cement which first hardens is
A 5CaO . 3Al2O3
B 3CaO . Al2O3
C 3CaO . SiO2
D 2CaO . SiO2
As compared to ordinary portland cement, use of pozzuolanic cement
A Reduces workability
B Increases bleeding
C Increases shrinkage
D Increases strength
Maximum alumina content in high alumina refractory can be as high as __________ percent.
A 30
B 50
C 70
D 90
Pure bauxite is the best raw material for the manufacture of high alumina refractories, in which maximum alumina content can be as high as __________ percent.
A 55
B 70
C 80
D 90
With increasing alumina content, the fusion point of high alumina refractories
A Increases
B Decreases
C Remains constant
D May increase or decrease ; depends on its alumina content
With increase in the alumina content, the refractoriness of high alumina refractories
A Increases
B Decreases
C Remains same
D May increase or decrease
Ordinary Portland Cement এর Initial Setting Time কত?
A ৫ মিনিট
B ১০ মিনিট
C ৩০ মিনিট
D ৫ ঘণ্টা
The normal consistency of ordinary Portland cement is about
A 10%
B 20%
C 30%
D 40%
Addition of pozzolana to ordinary Portland cement increases
A Bleeding
B Shrinkage
C Permeability
D Heat of hydration
As per IS specifications, the maximum final setting time for ordinary Portland cement should be
A 30 minutes
B 1 hour
C 6 hours
D 10 hours

Next steps