In a hot chamber die casting machine

A Ferrous alloys with low melting temperature are casted
B Ferrous alloys with high melting temperature are casted
C Nonferrous alloys with low melting temperature are casted
D Nonferrous alloys with high melting temperature are casted

Correct Answer: Nonferrous alloys with low melting temperature are casted

In a hot chamber die casting machine Nonferrous alloys with low melting temperature are casted.
In hot chamber machinery contains the alloy melting pot as part of the machine itself and uses a gooseneck to inject material from the pot into the die.
Materials used in hot chamber die casting are zinc, lead and magnesium alloys.
Bissoy MCQ
#Mechanical Engineering #Workshop Technology

Related Questions

Which of the following engineering materials is the most suitable candidate for hot chamber die casting?
A Low carbon steel
B Titanium
C Copper
D Tin
In a cold chamber die casting machine
A Melting pot is separate from the machine
B Melting pot is an integral part of the machine
C Melting pot may have any location
D Low temperature and pressure is used
A machine P can print out one lakh books in 8 hours. Machine Q can print the same number of books in 10 hours while machine R can print them in 12 hours. All the machines are started at 9 A.M.While machine P is stopped at 11 A.M. and remaining two machines completed the work. Approximately at what at what time will the work time (to print one lakh books) be finished?
A 11.30 Am
B 12 Noon
C 12.30 Pm
D 11.35 am
A small factory with 3 machines has a job of stamping out a number of pan covers. The newest machine can do the job is 3 days, another machine can do it in 4 days, and the third machine can do it in 6 days. How many days will the factory take to do the job using all the machine?
A 1.333
B 4.333
C 6
D 13
A machine P can paint one lakh books in 8 hours; machine Q can print the same number of books in 10 hours while machine R can print them in 12 hours. All the machines started operating at 9 A. M. while machine P is stopped at 11 A. M. and the reamaining two machines completed the work. Approximately at what time will the work (to print one lakh books) be finished?
A 11:30 A. M
B 12:00 noon
C 12:30 P. M.
D 1:00 P. M.
Three years ago, a machine was bought for Tk 1,00,000. The installation cost was Tk 20,000. The machine was depreciated in a straight line method at 20% per year. At the end of the 3rd year, the machine was sold for Tk 46,000. What is the gain/loss from sale of this machine?
A gain of Tk 2,000
B gain of Tk 6.000
C loss of Tk 2,000
D loss of Tk 6,000
E None of these
A ship is berthed in a chamber and lifted by principles of buoyancy Such a chamber is called.
A Dry dock
B Wet dock
C Floating dock
D Refuge dock
The probability of rolling any number of an wighted 6-sided die, with faces numbered 1 through 6, is directly proportional to the number rolled. What is the probability of getting 5, if the die is rolled only once?
A 1/6
B 5/6
C 5/16
D 5/21
The probability of rolling any number on a weight 6-sided die, with faces number 1 through 6, is directly proportional to the number rolled. What is the probability of getting 5, if the die is rolled only once?
A 1/6
B 5/6
C 5/16
D 5/21
“His die-hard supporters believe that he can win the race” এ বাক্যে “die-hard supporters” বলতে বুঝাচ্ছে __।
A বৃদ্ধ সমর্থক
B অসুস্থ সমর্থক
C নিবেদিত প্রাণ সমর্থক
D তরুণ ও অস্থির সমর্থক

Next steps