Related Questions

A machine P can print out one lakh books in 8 hours. Machine Q can print the same number of books in 10 hours while machine R can print them in 12 hours. All the machines are started at 9 A.M.While machine P is stopped at 11 A.M. and remaining two machines completed the work. Approximately at what at what time will the work time (to print one lakh books) be finished?
A 11.30 Am
B 12 Noon
C 12.30 Pm
D 11.35 am
A machine P can paint one lakh books in 8 hours; machine Q can print the same number of books in 10 hours while machine R can print them in 12 hours. All the machines started operating at 9 A. M. while machine P is stopped at 11 A. M. and the reamaining two machines completed the work. Approximately at what time will the work (to print one lakh books) be finished?
A 11:30 A. M
B 12:00 noon
C 12:30 P. M.
D 1:00 P. M.
When an alternator connected to the bus-bar is shut down the bus-bar voltage will
A Fall
B Rise
C Remain unchanged
D None of the above
In backhand welding, the angle between the welding rod and the work is ________ as compared to forehand welding.
A Same
B Less
C More
D None of these
In forehand welding, the angle between the welding torch and the work is ________ as compared to backhand welding.
A Same
B Less
C More
D None of these
If the flame of the welding torch is directed towards the progress of welding, then what will you call the welding technique?
A Forehand welding
B Flux cored ARC welding
C Electro slag welding
D Pulsed spray welding
In DC arc welding, if leads are arranged in work as Negative pole of the welding arc and electrode as Positive pole of the welding arc, the arrangement is known as
A Fusion
B Reverse polarity
C Forward welding
D Direct polarity
A small factory with 3 machines has a job of stamping out a number of pan covers. The newest machine can do the job is 3 days, another machine can do it in 4 days, and the third machine can do it in 6 days. How many days will the factory take to do the job using all the machine?
A 1.333
B 4.333
C 6
D 13
Three years ago, a machine was bought for Tk 1,00,000. The installation cost was Tk 20,000. The machine was depreciated in a straight line method at 20% per year. At the end of the 3rd year, the machine was sold for Tk 46,000. What is the gain/loss from sale of this machine?
A gain of Tk 2,000
B gain of Tk 6.000
C loss of Tk 2,000
D loss of Tk 6,000
E None of these
“Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen terminals of the load”. The above statement is associated with
A Millman’s theorem
B Thevenin’s theorem
C Superposition theorem
D Maximum power transfer theorem

Next steps