Related Questions

As the cutting speed increases, the tool cutting forces
A Remain constant
B Increases
C Decreases
D First increases and then decreases
The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is _________ cutting speed for drilling mild steel with high speed steel drills.
A Equal to
B Less than
C More than
D None of these
The cutting speed of a drill depends upon the
A Material of drill
B Type of material to be drilled
C Quality of surface finish desired
D All of these
In oblique cutting system, the cutting edge of the tool
A May clear the width of the workpiece
B May or may not clear the width of the workpiece
C May not clear the width of the workpiece
D Should always clear the width of the workpiece
In oblique cutting of metals, the cutting edge of the tool is
A Perpendicular to the workpiece
B Perpendicular to the direction of tool travel
C Parallel to the direction of tool travel
D Inclined at an angle less than 90° to the direction of tool travel
The angle made by the face of the tool and the plane parallel to the base of cutting tool is called
A Rake angle
B Cutting angle
C Clearance angle
D Lip angle
For machining a mild steel workpiece by a high speed steel tool, the average cutting speed is
A 5 m/min
B 10 m/ min
C 15 m/min
D 30 m/min
For machining a cast iron workpiece by a high speed steel tool, the average cutting speed is
A 10 m/min
B 15 m/min
C 22 m/min
D 30 m/min
The average cutting speed for turning brass with a high speed steel tool is
A 15 to 19 m/min
B 25 to 31 m/min
C 60 to 90 m/min
D 90 to 120 m/min
The average cutting speed for turning mild steel with a high speed steel tool is
A 15 to 19 m/min
B 25 to 31 m/min
C 60 to 90 m/min
D 90 to 120 m/min

Next steps