Related Questions

The actual feed in centerless grinders is given by (where d = Dia. of regulating wheel, n = Revolutions per minute, and α = Angle of inclination of wheel)
A πd
B πdn
C πdn sinα
D πdn cosα
In centerless grinders, the regulating wheel is inclined at
A 0° to 8°
B 9° to 15°
C 16° to 20°
D 21° to 25°
A circular wheel 28 inches in diameter rotates the same number of inches per second as a circular wheel 35 inches in diameter. If the smaller wheel makes x revolutions per second, how many revolutions per minutes does the larger wheel make in terms of x?
A 12x
B 24x
C 36x
D 48x
A wheel that has 6 cogs is meshed with a wheel of 14 cogs. When the smaller wheel has made 21 revolutions the number of revelution made by the larger wheel is --
A 4
B 9
C 12
D 49
A circular wheel 28 inches in diameter rotates (moves) the same number of inches per second as a circular wheel 35 inches in diameter. If the smaller wheel makes x revolutions per second, how many revolutions per minute does the larger wheel make in terms of x?
A 12x
B 48x
C 24x
D 36x
Accounts receivable at the end of the month is Tk 80,000. Bad debts are expected to be 5% of accounts receivable. If Allowance for Doubtful Accounts has a credit balance of Tk 1,000 before adjustment, what is the balance after adjustment?
A Tk 2,000
B Tk 3,000
C Tk 4,000
D Tk 5,000
E None of these
A wheel that had 6 cogs in meshed with a larger wheel if 14 cogs. When the smaller wheell had made 21 revolutions, the number wheel will be-
A 5
B 8
C 10
D 9
The fundamental equation for correct steering is (where $$\varphi $$ and $$\alpha $$ = Angle through which the axis of the outer wheel and inner wheel turns respectively, c = Distance between the pivots of the front axles and d = Wheel base)
A $$\sin \varphi + \sin \alpha = \frac{{\text{b}}}{{\text{c}}}$$
B $$\cos \varphi - \sin \alpha = \frac{{\text{c}}}{{\text{b}}}$$
C $$\cot \varphi - \cot \alpha = \frac{{\text{c}}}{{\text{b}}}$$
D $$\tan \varphi + \cot \alpha = \frac{{\text{b}}}{{\text{c}}}$$
The main size reduction operation in ultrafine grinders is
A Cutting
B Attrition
C Compression
D Impact
The reduction ratio for fine grinders is
A 5-10
B 10-20
C 20-40
D As high as 100

Next steps