The path taken by intake air is

A Carburettor (or throttle body) air cleaner intake manifold intake ports cylinders
B Air cleaner carburettor (or throttle body) intake ports intake manifold cylinders
C Air cleaner intake manifold carburettor (or throttle body) intake ports cylinders
D Air cleaner carburettor (or throttle body) intake manifold intake ports cylinders

Correct Answer: Air cleaner carburettor (or throttle body) intake manifold intake ports cylinders

The path taken by intake air is Air cleaner carburettor (or throttle body) intake manifold intake ports cylinders
Bissoy MCQ
#Mechanical Engineering #Automobile Engineering

Related Questions

Air intake for an air compressor should be preferably taken from
A A site, where cooling towers are located nearby
B A site, where open coal yard in located nearby
C An air conditioned room maintained at a temperature of 18°C
D An outside atmosphere at 10°C
When the addenda on pinion and wheel is such that the path of approach and path of recess are half of their maximum possible values, then the length of the path of contact is given by (where r = Pitch circle radius of pinion, R = Pitch circle radius of wheel and $$\varphi $$ = Pressure angle)
A $$\frac{{\left( {{{\text{r}}^2} + {{\text{R}}^2}} \right)\cos \varphi }}{2}$$
B $$\frac{{\left( {{{\text{r}}^2} + {{\text{R}}^2}} \right)\sin \varphi }}{2}$$
C $$\frac{{\left( {{\text{r}} + {\text{R}}} \right)\cos \varphi }}{2}$$
D $$\frac{{\left( {{\text{r}} + {\text{R}}} \right)\sin \varphi }}{2}$$
Out of the following, from where you will prefer to take intake for air compressor
A From an air conditioned room maintained at 20°C
B From outside atmosphere at 1°C
C From coal yard side
D From a side where cooling tower is located nearby
If the intake air temperature of I.C. engine increases, its efficiency will
A Increase
B Decrease
C Remain same
D None of these
If the temperature of intake air in internal combustion engine increases, then its efficiency will
A Remain same
B Decrease
C Increase
D None of these
Supercharging is the process of supplying the intake air to the engine cylinder at a density _________ the density of the surrounding atmosphere.
A Equal to
B Less than
C Greater than
D None of these
The process of supplying the intake air to the engine cylinder at a pressure greater than the pressure of the surrounding atmosphere is known as
A Supercharging
B Auto ignition
C Scavenging
D Detonation
The path ______ paved, so we were able to walk through the path.
A was
B had been
C has been
D being
A arden is 60m long and 20m wide. Inside the garden there is a 5m wide path around it . The area of the path is in square meter .
A 700
B 650
C 375
D 500
The path-------paved, so we were able to walk through the path.
A was
B had been
C has been
D being

Next steps