Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Ratio of chemical A and B in boiler Y is 3 : 2 and Boiler X has ratio of chemical A to chemical B as 1 : 7, 16 litres of mixture is removed transferred from boiler X to boiler Y. What is the total capacity of boiler Y if capacity of boiler X is 144 litres and difference between chemical A and B in boiler Y after transfer is 25 litres? Assume that after transferring 16 litres from boiler X, boiler Y is running at full capacity
For the same diameter and thickness of tube, a water tube boiler compared to a fire tube boiler has
Read the following statement about boilers. I. Water tube boiler is capable of generating steam of pressure more than 50 kg/cm2 . II. Fire tube boiler is suitable for generating steam of pressure less than 17.5 kg/cm2 . III. Water tube boiler occupy comparatively less space.
Thickness of 8 tyres L, M, N, O, P, Q, R and S is compared. Thickness of no two tyres is same. Thickness of N is more than L but less than 6 tyres. Thickness of O is more than M but less than Q. Thickness of P is less than only two tyres. Thickness of Q is not more than P. Which of the following statement is not correct?
A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube without fin
A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube with fin
Given below are three quantities named A, B and C. Based on the given information, determine the relation among the three quantities. Quantity A∶  A 30 litre mixture of wine and water has wine and water in the ratio 5∶ 7. How much water must be drawn off so that the ratio of wine and water becomes 25∶ 19? Quantity B∶ A 35 litre mixture of wine and water has wine and water in the ratio 1∶ 3. How much water must be drawn off so that the ratio of wine and water becomes 1.75∶ 3.35? Quantity C∶ A 27 litre mixture of wine and water has wine and water in the ratio 3∶ 2. How much water must be drawn off so that the ratio of wine and water becomes 81∶ 11?
A single pass shell and tube heat exchanger, consisting of a bundle of 100 tubes (inner diameter 25 mm and thickness 2 mm) is used for heating 28 kg/s of water from 25 degree Celsius to 75 degree Celsius with the help of a steam condensing at atmospheric pressure on the shell side with condensing heat transfer coefficient 5000 W/m2 degree. Make calculation for overall heat transfer coefficient based on the inner area. Take fouling factor on the water side to be 0.002 m2 degree/W per tube and neglect effect of fouling factor on the shell side and thermal resistance of the tube wall
Steam in water tube boiler as compared to fire tube boiler
What can you say about a water tube boiler's efficiency when compared to a fire tube boiler with equal features?