Bissoy.com
Doctors Medicines MCQs Q&A

In a jet propulsion unit, the products of combustion after passing through the gas turbine are discharged into

In a jet propulsion unit, the products of combustion after passing through the gas turbine are discharged into Correct Answer Discharge nozzle

In a jet propulsion unit, the products of combustion after passing through the gas turbine are discharged into discharge nozzle

Related Questions

In jet engines the products of combustion after passing through the gas turbine are discharged into
In a newly developed innovative idea brought up by CSIR in India, gas turbine exhaust gas are being utilized to convert feedwater into steam. Certain data of the experiment are as follows: mass flow rate of exhaust gas = 40 kg/hr, enthalpy of exhaust gas at the time of their exit from gas turbine is 600 kJ/kg, steam turbine output as measured by brake dynamometer = 60 hp-sec, thermal efficiency of steam power plant is 0.25, efficiency of exhaust gas in converting feedwater into steam is taken as 50%. Find the enthalpy of exhaust gas remaining after they generate steam from feedwater?
Consider the following statements in connection with hydraulic turbines: 1. The Kaplan turbine is a radial flow turbine in which the guide vane angles as well as the runner vane angles are adjustable. 2. Francis and Kaplan turbines are provided with draft tubes which carry water from exit of runner to tail water to increase the gross head across the turbine. 3. The parts of turbines susceptible to cavitation are the guide vanes and runner vanes – drastically reducing the turbine efficiency. 4. The specific speed of a 4-jet Pelton turbine will be 28 if the specific speed of a single-jet Pelton turbine is 14. Which of the above statements are correct?
Which of the following statement(s) is/are incorrect? (i) A turbine is called an impulse turbine if at the inlet of the turbine total energy is only kinetic energy (ii) A turbine is called a reaction turbine if at the inlet of the turbine the total energy is kinetic energy and pressure energy (iii) The inward flow reaction turbine having radial discharge at the outlet is known as Kaplan turbine
Which of the following statements are correct for turbo-prop powered aircraft? 1. The propulsion efficiency of turboprop is higher than that of turbo-jet and rockets for low speeds up to about 800 km/hr. 2. For the same thrust the turbine in the turbo-prop aircraft is smaller than in the turbo-jet aircraft 3. For the turbo-prop the flight velocity cannot exceed the jet velocity.
Consider the following statements with reference to Jet stream. 1. The Jet Stream is a geostrophic wind. 2. There are two permanent jet streams – subtropical jets at mid-latitudes and polar front jets at lower latitudes. 3. Temperature also influences the velocity of the jet stream. The lower the difference in air temperature, the faster the jet stream. Which of the statements given above is/are NOT correct?
Consider the following statement: A ray of light passing through the optical centre of a convex lens emerges without any deviation after refraction. A ray of light passing through the first principal focus of a convex lens  emerges parallel to the principal axis after refraction. A ray of light passing through the optical centre of a convex lens emerges parallel to the principal axis after refraction. Which one of the following statements INCORRECT?
Which of the following are essential for a good combustion chamber of turbojet engine? 1. It should allow complete combustion of fuel. 2. It should maintain sufficiently high temperature in the zone of combustion in addition to proper atomization of fuel thus leading to continuous combustion. 3. It should not have high rate of combustion. 4. The pressure drop should be as small as possible
Consider the following statements: A ray parallel to the principal axis incident on a concave mirror after reflection passes through the focus. A ray passing through the center of curvature of a concave mirror after reflection is reflected back along the same path. A ray passing through the center of curvature of a concave mirror after reflection passes through the focus. Which of the following statement is INCORRECT?
Consider the following statements for fluidized bed boilers: 1. Fluidized bed boilers produce steam from fossil and waste fuels by using a technique called fluidized bed combustion. 2. Cyclone separators are gas cleaning devices that utilize the centrifugal force created by a spinning gas stream to separate particles from a gas. 3. In a pressurized fluidized bed boiler, the combustion process takes place in a pressurized environment resulting in a compact furnace and improved combustion efficiency. Which of the above statements are correct?