Bissoy.com
Doctors Medicines MCQs Q&A

The force exerted by a jet of water impinging normally on a plate which due to the impact of jet, moves in the direction of jet with a velocity v is

The force exerted by a jet of water impinging normally on a plate which due to the impact of jet, moves in the direction of jet with a velocity v is Correct Answer $$\frac{{{\text{wa}}{{\left( {{\text{V}} - {\text{v}}} \right)}^2}}}{{\text{g}}}$$

Related Questions

The force exerted (in Newton) by a jet of water impinging normally on a fixed plate is (where w = Specific weight of water in N/m3, a = Cross-sectional area of jet in m2 and V = Velocity of jet in m/s)
The force exerted by a jet of water (in a direction normal to flow) impinging on a fixed plate inclined at an angle $$\theta $$ with the jet is
A jet of water issues from a nozzle with a velocity of 10 m/s and it impinges normally on a fixed flat plate. The cross sectional area of the jet is 0.02 m2 and the density of water is 1000 kg/m3 . What is the force developed on the plate?
Which of the following forces are measured directly by strain gauges or force dynamometers during metal cutting? 1. Force exerted by the tool on the chip acting normally to the tool face 2. Horizontal cutting force exerted by the tool on the workpiece 3. Frictional resistance of the tool against the chip flow acting along the tool face 4. Vertical force which helps in holding the tool in position Select the correct answer using the codes given below.
The average drag coefficient for turbulent boundary layer flow past a thin plate is given by C f = 0.455/ (log 10 R el) 2.58 Where R el is the Reynolds number based on plate length. A plate 50 cm wide and 5 m long is kept parallel to the flow of water with free stream velocity 3 m/s. Calculate the drag force on both sides of the plate. For water, kinematic viscosity = 0.01 stokes
A man moves 24 metres in south direction and turns 90 degrees anticlockwise and moves another 7 metres and takes a right turn and moves 3 metresand then moves 3 metres in the north direction. Find the distance between his initial and his final position.
The force exerted by a jet of water in the direction of jet of jet on a stationary curved plates Fx is ____________
The force exerted by a jet of water in the direction of jet of jet on moving curved plates is ___________
Rinki has three plates of Jalebies: Plate A, Plate B and Plate C. Plate A has only one Jalebi, Plate B has five Jalebies and Plate C has three Jalebies. She wants to put equal numbers of Jalebies in all the plates. Which of the following statement is true?
A jet of water is striking at the centre of a curved vane moving with a uniform velocity in the direction of jet. For the maximum efficiency, the vane velocity is ________ of the jet velocity