Related Questions

Most architectural drawings produced for field use by building contractors are printed on architectural "D" size paper which measures __________.
A 24" × 36"
B 18" × 24"
C 11" × 17"
D 34" × 22"
Find out which quotation parts of the following sentences has an error. Despite 'the differences' between the 'speaking styles' of boys and girls, 'there is' some simalarities in 'their styles' and concerns.
A the difference
B speaking styles
C there is
D their styles
The architectural drafter usually begins a set of working drawings by creating the ________ plan first.
A Foundation
B Floor plan
C Elevations
D Building section
When dimensioning architectural drawings architects will utilize both ________ and ________ options.
A Baseline and continuous
B Baseline and linear
C Quick dim and linear
D Linear and continuous
A,B,C,D,E,G and I are seven friends who study in three different standards namely 5th, 6th and 7th such that not less than two friends study in the same standard. Each friend also has a different favorite subject namely History, Civics, English, Bangla, Science , Maths , and Economics but not necessarily in the same order. A likes Maths and studies in the 5th standard with only one other friend who likes Bangla. I studies with tow other friends . Both the friends who study with I like languages (Here languages include only Science , English and Bangla ) . D studies in the 6th standard with only one person and does not like Civics . E studies with only one friend . The one who likes history does not study in 5th or 6th standard . E does not like languages. C does not like English , Science or Civics. Which combination represents E's favorite subject and the standard in which he studies?
A Civics and 7th
B Economics and 5th
C Civics and 6th
D History and 7th
Which key is used to obtain properties palette in AutoCAD?
A Control+1
B Control+2
C Control+3
D Control+4
Which type of coordinate system is used in AutoCAD?
A 2-Dimensional
B 3-Dimensional
C 1-Dimensional
D User dependent
A typical set of mechanical working drawings includes ________.
A Exploded assembly
B Part details
C Parts list
D All of the above
When a body is subjected to direct tensile stresses ($${\sigma _{\text{x}}}$$ and $${\sigma _{\text{y}}}$$) in two mutually perpendicular directions, accompanied by a simple shear stress $${\tau _{{\text{xy}}}}{\text{,}}$$  then in Mohr's circle method, the circle radius is taken as
A $$\frac{{{\sigma _{\text{x}}} - {\sigma _{\text{y}}}}}{2} + \tau $$
B $$\frac{{{\sigma _{\text{x}}} + {\sigma _{\text{y}}}}}{2} + \tau $$
C $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
D $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
The "snap" command feature in both AutoCAD and VersaCAD ensure that:
A template lines can be removed
B objects are entered at specific intervals.
C identified data are automatically segmented
D definable center markers are entered.
E None of the above

Next steps