Related Questions

When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which (where, Fa is the load shared by each rivet due to axial load and Fm is the shearing load due to moment in any rivet.)
A Is at the maximum distance from CG of the rivet group
B Is at the minimum distance from CG of the rivet group
C Gives the maximum angle between the two forces Fa and Fm
D Gives the minimum angle between the two forces Fa and Fm
In a riveted joint, when the number of rivets decreases from the inner most row to outer most row, the joint is said to be
A Chain riveted
B Zig-zag riveted
C Diamond riveted
D None of these
A triple riveted butt joint with double straps of unequal width is to be designed for a boiler shell. The pitch of the rivets in the outer row is double the pitch in the inner row and zigzag riveting is proposed. Which of the following statement is correct?
A There are four rivets per pitch length, all in double shear
B There are four rivets per pitch length, out of which two are in single shear and two are in double shear
C There are five rivets per pitch length, all in double shear
D There are five rivets per pitch length, out of which four are in double shear and one is in single shear
The hoop stress in a riveted cylindrical shell of diameter (d), thickness (t) and subjected to an internal pressure (p) is (where $$\eta $$ = Efficiency of the riveted joint)
A $$\frac{{{\text{pd}}}}{{{\text{t}}\eta }}$$
B $$\frac{{{\text{pd}}}}{{2{\text{t}}\eta }}$$
C $$\frac{{{\text{pd}}}}{{4{\text{t}}\eta }}$$
D $$\frac{{{\text{pd}}}}{{8{\text{t}}\eta }}$$
In a riveted joint, when the rivets in the various rows are opposite to each other, the joint is said to be
A Chain riveted
B Zig-zag riveted
C Diamond riveted
D None of these
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as ________ double cover butt joint.
A Single riveted
B Double riveted
C Multi riveted
D None of these
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as _______ double cover butt joint.
A Single riveted
B Double riveted
C Both (A) and (B)
D None of these
A riveted joint in which the number otrivets decrease from innermost to outer most rows is called
A Chain riveted joint
B Diamond riveted joint
C Crisscross riveted joint
D Zigzag riveted joint
A welded joint as compared to a riveted joint has __________ strength.
A Same
B Less
C More
D None of these
The objective of caulking in a riveted joint is to make the joint
A Free from corrosion
B Stronger in tension
C Free from stress
D Leak-proof

Next steps