Related Questions

For maximum transfer of power, internal resistance of the source should be
A Equal to load resistance
B Less than the load resistance
C Greater than the load resistance
D None of the above
Efficiency of power transfer when maximum transfer of power c xerosis
A 100%
B 80%
C 75%
D 50%
Extended heat transfer surface like fins are used to increase the heat transfer rate. Fin efficiency is defined as the ratio of heat transferred across the fin surface to the theoretical heat transfer across an equal area held at the
A Surrounding temperature
B Average temperature of the fin
C Temperature of the fin end
D Constant temperature equal to that of the base
The scales form in heat exchanges after a period of operation and provide additional resistance to heat transfer with some heat transfer coefficient . The reciprocal of this scale heat transfer coefficient is called .
A scaling factor
B forming factor
C resisting factor
D fouling factor
The device which transfer the signal from low resistance region to high resistance region is
A Diode
B Transistor
C Capacitor
D Inductor
The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called
A Compressive stress
B Shear stress
C Bending stress
D Elastic modulus
In order to get maximum power transfer from a capacitive source, the load must have an impedance that is the complex conjugate of the source impedance.
A True
B False
A single phase transformer has a maximum efficiency of 90% at full load and unity power factor. Efficiency at half load at the same power factor is -
A 87.8%
B 86.7%
C 88.26%
D 88.9%
The ratio of surface convection resistance to the internal conduction resistance is known as
A Grashoff number
B Biot number
C Stanton number
D Prandtl number
সিরিজে সংযুক্ত একটি এ্যামিটার এবং একটি অজানা রোধ দুটি একই রকম 1.5 V ব্যাটারীর দুই প্রান্তে সংযুক্ত আছে। যখন ব্যাটারী দুটি সিরিজে সংযুক্ত থাকে তখন এ্যামিটার। amp রিডিং প্রদর্শন করে। আবার ব্যাটারী দুটি সমান্তরালে সংযুক্ত করলে 0.6 amp রিডিং প্রদর্শন করে। ব্যাটারীর আভ্যন্তরিন রোধ কত ? (An ammeter and an unknown resistance are connected in series across two identical batteries of each 1.5 V. The ammeter shows current I amp and 0.6 amp when the batteries are connected in series and parallel, respectively. What is the internal resistance of the battery?)
A 13Ω
B 12Ω
C 1Ω
D 0.1Ω
E 23Ω

Next steps