Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Consider the following statements for dynamic characteristics of a measurement system: 1. Fidelity is defined as the degree to which a measurement system indicates changes in the measured quantity without any dynamic error. 2. Dynamic error is the difference between the true value of the quantity changing with time and the value indicated by the measurement system if no static error is assumed. 3. Measuring lag is the retardation in the response of a measurement system to changes in the measured quantity. Which of the above statements are correct?
Consider the following statements in connection with deflection-type and null-type instruments: 1. Null-type instruments are more accurate than the deflection-type ones. 2. Null-type of instrument can be highly sensitive compared to a deflection-type instrument. 3. Under dynamic conditions, null-type instruments are less preferred to deflection-type instruments. 4. Response is faster in null-type instruments as compared to deflection-type instruments. Which of the above statements are correct?
Select differences between reference type and value type: i. Memory allocated to ‘Value type’ is from heap and reference type is from ‘System. ValueType’ ii. Memory allocated to ‘Value type’ is from ‘System. ValueType’ and reference type is from ‘Heap’ iii. Structures, enumerated types derived from ‘System. ValueType’ are created on stack, hence known as ValueType and all ‘classes’ are reference type because values are stored on heap
In retardation type measuring lag the instrument responds after an unspecified dead time lag.
Assertion (A): Relative stability of the system reduces due to the presence of transportation lag. Reason (R): Transportation lag can be conveniently handled by Bode plot.
Consider the following grammar and the semantic actions to support the inherited type declaration attributes. Let X1, X2, X3, X4, X5 and X6 be the placeholders for the non-terminals D, T, L or L1 in the following table: Production rule Semantic action D → T L X1.type = X2.type T → int T.type = int T → float T.type = float L → L1, id X3.type = X4.type addType(id.entry, X5.type) L → id addType(id.entry, X6.type)   Which one of the following are the appropriate choices for X1, X2, X3 and X4?
The network formed by resistors and capacitors for modifying the rate of change of gain and the phase shift is called a compensating network. Which of the following statements are not correct ? (A) The main purpose of a compensating network is to modify the performance of op-amp ciruit over the desired frequency range (B) There are two types of op-amps : internally compensated and externally compensated (C) 741 C is an externally compensated op-amp while 709 C is internally compensated op-amp (D) The phase lag and phase lead are most commonly used compensating networks in op-amps (E) Phase lag contributes a positive phase angle and phase lead a negative phase angle Choose the most appropriate answer from the options given below : 
What is the approximate capacitor in kVAR to be added to 3.7 kW/5 hp 1440 RPM agriculture pump motor for power factor improvement from 0.75 lag to near 0.95 lag?
A single phase motor is connected to 400V, 50Hz supply. The motor draws a current of 31.7A at a power factor 0.7 lag. The capacitance required in parallel with motor to raise the power factor of 0.9 lag (in micro farads) is __________
A single phase motor is connected to 400V, 50Hz supply. The motor draws a current of 31.7A at a power factor 0.7 lag. The capacitance required in parallel with motor to raise the power factor of 0.9 lag (in micro farads) is ___________