Related Questions

Which of the following special shell variables is used to process number of the last background job?
A $!
B $#
C $0
D $*
E None of the above
A thin spherical shell of internal diameter d is subjected to an internal pressure p. If $${\sigma _{\text{t}}}$$ is the tensile stress for the shell material, then thickness of shell is equal to
A $$\frac{{{\text{pd}}}}{{{\sigma _{\text{t}}}}}$$
B $$\frac{{{\text{pd}}}}{{2{\sigma _{\text{t}}}}}$$
C $$\frac{{{\text{pd}}}}{{3{\sigma _{\text{t}}}}}$$
D $$\frac{{{\text{pd}}}}{{4{\sigma _{\text{t}}}}}$$
In a shell and tube heat exchanger, putting a longitudinal baffle across the shell, forces the shell side fluid to pass __________ through the heat exchanger.
A Once
B Twice
C Thrice
D Four times
In case of a shell and tube heat exchanger, the minimum shell thickness for carbon steel (inclusive of corrosion allowance) depends on shell diameter and is in the range of __________ mm.
A 3-5
B 5-11
C 8-15
D 12-18
Which are usually variables that are used internally in object methods and also are globally visible variables?
A Object properties
B Variable properties
C Method properties
D Internal properties
If the baffle spacing in a shell and tube heat exchanger increases, then the Reynolds number of the shell side fluid
A Remains unchanged
B Increases
C Increases or decreases depending on number of shell passes
D Decreases
The special shell variable $* is used
A to exit status of ast command executed.
B to process number of the current shell
C to list the positional parameters
D to name the command being executed
E None of the above
Baffles are provided in a shell and tube heat exchanger to increase the turbulence and velocity of the shell side fluid. Which of the following shaped baffles does not fall in the category of transverse baffle?
A Segmental baffle
B Flat plate extending across the wall
C Disk type baffle
D Helical type baffle
A thin spherical shell of internal diameter d is subjected to an internal pressure p. If V is the storage capacity of shell, then its diameter will be
A $${\left( {\frac{{6{\text{V}}}}{\pi }} \right)^{\frac{1}{2}}}$$
B $${\left( {\frac{{6{\text{V}}}}{\pi }} \right)^{\frac{1}{3}}}$$
C $${\left( {\frac{{6{\text{V}}}}{\pi }} \right)^2}$$
D $${\left( {\frac{{6{\text{V}}}}{\pi }} \right)^3}$$
In case of a multipass shell and tube heat exchanger, providing a baffle on the shell side __________ the heat transfer rate.
A Increases
B Decreases
C Does not affect
D May increase or decrease, depends on the type of baffle

Next steps