Related Questions

Raw material purchased:
1st January, 600 units @ Rs. 12 per unit
12th January, 500 units @ Rs. 14 per unit
21st January, 300 units @ Rs. 13 per unit
Raw material issued for manufacture:
3rd January 300 units
5th January 124 units
15th January 250 units
16th January 300 units
Raw material returned to stores from manufacturing department on 14th January, 50 units. The material is issued on First-in-First out method.
The value of material remaining in store on 21st January will be:
The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream, and calculate the moles of nitrogen entering the reactor and in the recycle stream?
The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream, and calculate the number of moles, moles of inerts and moles of hydrogen in the recycle stream?
Which of the following is/are the advantages of using a control chart for inspection? (i) A control chart indicates whether the process is in control or out of control. (ii) A control chart determines process variability. (iii) A control chart ensures product quality. (iv) Scrap or percentage reduction can be reduced by taking the necessary actions in time against the warnings indicated by control charts. (v) Control charts build up the reputation of the organization through customer’s satisfaction. (vi) The control chart can detect the unusual variations taking place in a process.
The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream. Calculate the moles of ammonia produced.
If beginning work in process equivalent units are 2500 units, work done in current period equivalent units are 3800 units and ending work in process equivalent units are 5000, then complete equivalent units in current period are
If beginning work in process equivalent units is 2500 units, work done in current period equivalent units is 3800 units and units completed in current period are 4000, then ending work in process equivalent units will be
How many ALU(s) is/are control by one control unit is SIMD (single instruction stream, multiple data stream) architecture?
Budgeted sales of X for March are 18000 units. At the end of the production process for X, 10% of production units are scrapped as defective. Opening inventories of X for March are budgeted to be 15000 units and closing inventories will be 11,400 units. All inventories of finished goods must have successfully passed the quality control check. The production budget for X for March, in units is:
"Calculate the value of closing stock from the following according to FIFO method:
1st January, 20XX: Opening balance: 50 units @ Rs 4

Receipts:
5th January, 20XX: 100 units @ Rs 5
12th January, 20XX: 200 units @ Rs 4.50

Issues:
2nd January, 20XX: 30 units
18th January, 20XX: 150 units"