An alternator is an electromechanical ac generator.

An alternator is an electromechanical ac generator. Correct Answer True

An alternator is indeed an electromechanical AC generator. It operates on the principle of electromagnetic induction to convert mechanical energy into electrical energy in the form of alternating current (AC). While someone may say "False" for various reasons, the generally accepted understanding in the field of electrical engineering is that an alternator is a type of AC generator.
Bissoy MCQ

Related Questions

In a turbopump system using a gas generator cycle, the flame temperature in the separate gas generator where a small portion of overall propellant is burned is _________ compared to the main gas generator and its mixture ratio is _________ compared to that of the main gas generator.
A system consists of an alternator having reactance of 0.5pu connected to an infinite bus through a series of reactance of 1 pu. The generator terminal voltage of IBB is 1 pu and that of 1.2 pu. The emf induced in the alternator will have the phase difference with respect to reference for the maximum power transfer is _______________
An isolated generator connected to a turbine with its continuous maximum power of 20 MW, 50 Hz. Generator connected with two loads of 8 MW, each operate at 50 Hz.. Generator has 5% droop characteristic. If an additional load of 6 MW is added then frequency will be ___________
Two generators A and B have 6 poles each. Generator A has wave wound armature while generator B has lap wound armature. The ratio of the induced e.m.f. is generator A and B will be
The iron losses in a saturated three phase alternator is lesser than the non-saturated three phase alternator.
An alternator is to be used for generation purpose in an aircraft. The most suited operating frequency of the alternator should be ____________
(I) Speed of an isolated alternator can be altered. (II) Speed of an alternator connected to IBB can be also altered.
(I) For constant power of an isolated alternator, V-curves can be obtained. (II) For constant power of an alternator connected to IBB, V-curves can be obtained
The active power delivered by an alternator will _______ when the prime mover input is increased for the alternator connected to infinite bus bar.
______ alternator is used in thermal stations and ______ alternator is used in hydel plants.