Related Questions

পাত-দূরত্ব d এবং ধারকত্ব C. এমন একটি সমান্তরাল পাত ধারকের পাত দুটির মাঝখানে d/2 পুরুত্ববিশিষ্ট একটি ধাতব পাত স্থাপন করা হলো। নতুন ধারকত্ব কত হবে? (A metal plate of thickness d/2 is inserted between the plates of a parallel plate capacitor with plate separation d and capacitance C. What is the new capacitance?)
A C/d
B C/2
C 4Cd
D 2c
In leaf springs, the maximum bending stress developed in the plates is (where W = Load acting on the spring, $$l$$ = Span of the spring, n = Number of plates, b = Width of plates and t = Thickness of plates)
A $$\frac{{{\text{W}}l}}{{{\text{nb}}{{\text{t}}^2}}}$$
B $$\frac{{3{\text{W}}l}}{{2{\text{nb}}{{\text{t}}^2}}}$$
C $$\frac{{2{\text{W}}l}}{{{\text{nb}}{{\text{t}}^2}}}$$
D $$\frac{{3{\text{W}}l}}{{{\text{nb}}{{\text{t}}^2}}}$$
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খন্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডতির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
A 4 cm
B 6 cm
C 9 cm
D 12 cm
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খণ্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডটির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
A 4 cm
B 6 cm
C 9 cm
D 12 cm
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as ________ double cover butt joint.
A Single riveted
B Double riveted
C Multi riveted
D None of these
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as _______ double cover butt joint.
A Single riveted
B Double riveted
C Both (A) and (B)
D None of these
Two plates of a parallel plate capacitor after being charged from a constant voltage source are separated apart by means of insulated handles, then the
A Voltage across the plates increases
B Voltage across the plates decreases
C Charge on the capacitor decreases
D Charge on the capacitor increases
If the main reinforcement of the slab is parallel to a T-beam, the transverse reinforcement at mid span of the slab is provided at least __________ of main reinforcement.
A 40%
B 50%
C 60%
D 70%
While testing a capacitor with ohm meter, if the capacitor shows charging, but the final resistance reading is appreciably less than normal, it can be concluded that the capacitor is
A Short-circuited
B Open circuited
C Alright
D Leaky
An R.C.C. roof slab is designed as a two way slab if
A It supports live loads in both directions
B The ratio of spans in two directions is less than 2
C The slab is continuous over two supports
D The slab is discontinuous at edges

Next steps