Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

A laboratory teacher had 1.5 litres of concentrated sulfuric acid. She replaces concentrated sulfuric acid with water after every class till the carton is empty. One student needs 10 ml of sulfuric acid mixture in every class. First class had 20 students and since then all other classes observed 10 students. Calculate total quantity of water with which mixture of sulfuric acid and water is replaced till carton is empty. Note 1.5 litres of concentrated sulfuric acid had 90% sulfuric acid and rest water
Which of the following statements is always correct about an ideal chemostat?
P. Substrate concentration inside the chemostat is equal to that in the exit stream.
Q. Optimal dilution rate is lower than critical dilution rate.
R. Biomass concentration increases with increase in dilution rate.
S. Cell recirculation facilitates operation beyond critical dilution rate.
In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.
How many liters of a 90% of concentrated acid needs to be mixed with a 75% Solution of concentrated acid to get a 30 liter Solution of 78% concentrated acid?
Dr. Xman is diluting concentrated HCl acid by mixing water in it. The quantity of mixture is 32 l. The ratio of concentrated HCl to water is 7 ∶ 1. If 3 l of water is added to the mixture, the ratio of HCl to water changes to new ratio. If he want to change back the new ratio to the original value, how much concentrated HCl is to be added?
Assertion A: pH of a buffer solution solution does not change on dilution. Reason R: On dilution the ration of concentration of salt and acid (or base) remains unchanged.
A data-driven machine is one that executes an instruction if the needed data is available. The physical ordering of the code listing does not dictate the course of execution. Consider the following pseudo-code 1) Multiply E by 0.5 to get F 2) Add A and B to get E 3) Add B with 0.5 to get D 4) Add E and F to get G 5) Add A with 10.5 to get C Assume A, B, C are already assigned values and the desired output is G Which of the following sequence of execution is valid?
Created: 1 month ago | Updated: 1 month ago Options Edit Question Add Description Add Bookmark Add Tag Add Video Error Report
Created: 4 weeks ago | Updated: 4 weeks ago Options Edit Question Add Description Add Bookmark Add Tag Add Video Error Report
Created: 3 weeks ago | Updated: 3 weeks ago Options Edit Question Add Description Add Bookmark Add Tag Add Video Error Report