Related Questions

Determine the resistance value and tolerance of a resistor that has the following color bands; first band is red, second band is red, third band is orange, and the fourth band is gold
A 220 Ohm, 5%
B 220 Ohm, 10%
C 22,000 Ohm, 5%
D 22, 000 Ohm, 10%
E None of the above
A band-pass filter rejects all frequencies within a band between a lower and an upper critical frequency and passes all others.
A True
B False
The bandwidth of C-band satellite frequency band in U.S.
A 500 GHz
B 1000 GHz
C 1000 MHz
D 500 MHz
সুপরিবাহী পদার্থে Valence Band এবং conduction band-
A আলাদা থাকে
B ওভারল্যাপ থাকে
C অনেক দূরে থাকে
D কোনটিই নয়
The forbidden energy gap between the valence band and conduction band will be least in case of
A Metals
B Semiconductors
C Insulators
D All of the above
The current due to electron flow in conduction band is the hole current in valence band.
A Equal to
B Less than
C Greater than
D Any of the above
In a band and block brake, the ratio of tensions on tight side and slack side of the band is (where $$\mu $$ = Coefficient of friction between the blocks and the drum, $$\theta $$ = Semi-angle of each block subtending at the center of drum and n = Number of blocks)
A $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = \mu \theta {\text{n}}$$
B $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 - \mu \tan \theta }}{{1 + \mu \tan \theta }}} \right)^{\text{n}}}$$
C $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\mu \theta } \right)^{\text{n}}}$$
D $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 + \mu \tan \theta }}{{1 - \mu \tan \theta }}} \right)^{\text{n}}}$$
In a band and block brake, the ratio of tensions on the tight and slack sides of band is given by (where $$\mu $$ = Coefficient of friction between the blocks and the drum, $$\theta $$ = Semi-angle of each block subtending at the centre of drum and n = Number of blocks)
A $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_{\text{2}}}}} = \mu \theta \times {\text{n}}$$
B $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\mu \theta } \right)^{\text{n}}}$$
C $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 - \mu \tan \theta }}{{1 + \mu \tan \theta }}} \right)^{\text{n}}}$$
D $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 + \mu \tan \theta }}{{1 - \mu \tan \theta }}} \right)^{\text{n}}}$$
For accurate work, the steel band should always be used in preference to chain because the steel band
A is lighter than chain
B is easier to handle
C is practically inextensible and is not liable to kinks when in use
D can be easily repaired in the field
What is the frequency range of C-band?
A 8.5 to 12.5 GHz
B 3.4 to 6.425 GHz
C 12.95 to 14.95 GHz
D 27.5 to 31 GHz

Next steps