Bissoy.com
Doctors Medicines MCQs Q&A

Programs stored in ROM are called

Programs stored in ROM are called Correct Answer Firmware

The programs which are as permanent as hardware and stored in ROM are known as Firmware.

 

Data stored in ROM can only be modified slowly, with difficulty, or not at all, so it is mainly used to store firmware (software that is closely tied to specific hardware, and unlikely to need frequent updates) or application software in plug-in cartridges.

Related Questions

Consider the following statements: 1. RAM is a non-volatile memory whereas ROM is a volatile memory 2. RAM is a volatile memory whereas ROM is a non-volatile memory 3. Both RAM and ROM are volatile memories but in ROM data is not when power is switched off Which of the above statements are correct?
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification.   A ROM is to be used to implement a “Squarer”, which outputs the square of a 3-bit number. What must be the size of the ROM?
Consider the following statements regarding PROM/EPROM: 1. The erasable programmable ROM using ultraviolet erasing is known as EPROM. 2. The ROM that makes use of the electrical voltage for erasing is known as electrically alterable ROM. 3. A PROM can be programmed many times after fabrication. Which of the above statements are correct?
The programs which are as permanent as hardware and stored in ROM is known as
The programs which are as permanent as hardware and stored in ROM is known as ---
One of the biggest threats to a company’s porductivity is absenteeism. Student show that companies with in-house child-care programs see fewer absences among their employees who are parents than companies without such programs. Therefore, many companies could boost their productivity by starting in-house child-care programs. Which of the followings, if true, most weakens the above argument?
Who is 1988 announced the latest version of CD-ROM called CD-ROMXA (extended architecture) which provides a documented means of integrating digital audio with computer data on a CD-ROM disk?
Consider the following statements regarding the Read Only Memory (ROM): 1. The stored data is lost if the power is removed. 2. It consists of an address decoder with a input lines and a programmable OR array with n output lines. 3. The minterms are ORed through the programmable switches which can be made ON or OFF to select a particular minterm. The programmable switches can be implemented by either bipolar, CMOS, nMOS or pMOS technologies. 4. Mask-programmed ROMs are used in the application where the system requires data to be stored and to be changed during the operation. Which of the above statements are not correct ?
When installing a SCSI CD-ROM drive, you must set the CD-ROM SCSI adapter to:
A computer employs RAM chips of 256 bytes and ROM chips of 1024 bytes. If the computer system needs 1kB of RAM and 1kB of ROM, then how many address lines are required to access the memory?