Calculate the reactive power in a 7.2545 Ω resistor.

Calculate the reactive power in a 7.2545 Ω resistor. Correct Answer 0 VAR

The resistor is a linear element. It only absorbs real power and dissipates it in the form of heat. The voltage and current are in the same phase in case of the resistor so the angle between V & I is 0°. Q=VIsin0° = 0 VAR.
Bissoy MCQ

Related Questions

Under the condition for 3 phase alternator, maximum active power output, the delivered reactive power output is ________ while under maximum reactive power output, the delivered reactive power is ________
The parallel combination of a 6.8 kΩ resistor and a 10 kΩ resistor is in series with the parallel combination of a 2.2 kΩ resistor and a 1 kΩ resistor. A 100 V source is connected across the circuit. The resistor(s) with the greatest voltage drop is (are)
A certain series circuit consists of a $$\frac{1}{8}$$ W resistor, a $$\frac{1}{4}$$ W resistor and a $$\frac{1}{2}$$ W resistor. The total resistance is 1200 Ω. If each resistor is operating in the circuit at its maximum power dissipation, total current flow is
A source maintains a current I in a resistor of resistor of resistance R. If V is the potential difference across the resistor. The electrical energy dissipated in the resistor in time is given _____
Two resistors are in series: a 5.6 kΩ resistor and a 4.7 kΩ resistor. The voltage drop across the 5.6 kΩ resistor is 10 V. The voltage across the 4.7 kΩ resistor is
Four resistors are connected in parallel. Fifteen mA flows through resistor R. If the second resistor is 2R, the third resistor 3R, and the fourth resistor 4R, the total current in the circuit is
A 12 kΩ resistor, a 15 kΩ resistor, and a 22 kΩ resistor are in series with two 10 kΩ resistors that are in parallel. The source voltage is 75 V. Current through the 15 kΩ resistor is approximately
Referring this circuit, determine the maximum output voltage when a single pulse is applied as shown. The total resistance is 60 Ω.
Time Response of Reactive Circuits mcq question image
Referring to the bellow figure, determine the voltage level that the output will reach during the pulse.
Time Response of Reactive Circuits mcq question image
Referring to the give circuit, the output will.
Time Response of Reactive Circuits mcq question image