RAID level ________ refers to disk arrays with striping at the level of blocks, but without any redundancy.

Your Windows 2000 Server computer contains a stripe set with parity on a four-disk array. You convert the stripe set with parity to a dynamic RAID-5 volume. Six months later, users report that disk access on the server is slower than it had been on the previous day, You use Disk Management and discover that the status of the third disk in the array is Missing. You want to recover the failed RAID-5 volume. What should you do first?

A

Replace the third disk and restart the server. Use disk Management to repair the volume

B

Ensure that the third disk is attached to the server and has power. Use Disk Management to reactivate the disk

C

Ensure that the third disk is attached to the server and has power. Use Disk Management to repair the volume

D

Install a new disk and create a single extended partition on the new disk. Restart the computer and allow Windows 2000 to automatically repair the volume on the extended partition

E

None of above

Your Windows 2000 Server computer contains a stripe set with parity on a four-disk array. You convert the stripe set with parity to a dynamic RAID-5 volume. Six months later, users report that disk access on the server is slower than it had been on the previous day. You use Disk Management and discover that the status of the third disk in the array is missing. You want to recover the failed RAID-5 volume. What should you do first?

A

Replace the third disk and restart the server. Use Disk Management to repair the volume

B

Ensure that the third disk is attached to the server and has power. Use Disk Management to reactivate the disk

C

Ensure that the third disk is attached to the server and has power. Use Disk Management to repair the volume

D

Install a new disk and create a single extended partition on the new disk. Restart the computer and allow Windows 2000 to automatically repair the volume on the extended partition

E

None of above

You install your boot volume on volume C on your Windows 2000 Server computer. You mirror volume C on dynamic Disk 1. Two years later, during routine server maintenance, you open Disk Management and find that the status of volume C is Failed Redundancy. The status of Disk 1 is Missing. You attempt to reactivate Disk 1, but the status of volume C does not return to Healthy. What should you do next?

A

Replace Disk 1 and restart the computer. The mirror will automatically regenerate

B

Remove the mirror on Disk 1, replace the disk, and then add back the mirror to the new Disk 1

C

Replace Disk 1 and copy all data from volume C to a new NTFS primary partition on the new Disk 1. Restart the computer

D

Rescan the disks, remove the mirror, and delete the data on Disk 1. Then re-create the mirror

E

None of above

Which level of RAID refers to disk mirroring with block striping?

A

RAID level 1

B

RAID level 2

C

RAID level 0

D

RAID level 3

RAID level 0+1 is used because, RAID level 0 provides ______ whereas RAID level 1 provides ________

A

performance, redundancy

B

performance, reliability

C

redundancy, performance

D

none of the mentioned

RAID level _____ is also known as block interleaved parity organisation and uses block level striping and keeps a parity block on a separate disk.

A

1

B

2

C

3

D

4

An array of disks is more likely to fail compared to a single disk. How is it that RAID arrays still manage to provide more data protection compared to a single disk?

A

Using either mirroring or striping

B

Using either mirroring or parity

C

Using better quality disks

D

Using dedicated hardware

You want to provide complete redundancy for all data stored on your hardware RAID 5 array. You install second h/w Raid 5. You want to create a mirror set of the original array. However when you right click the free space on new array you see no option to create a new volume or mirrrored volume. What should you do?

A

Convert both to dynamic disks

B

Create an empty extended partition on new disk

C

Create a single unformatted primary partition on new array

D

Format new disk array as a single NTFS primary partition

E

Format the new disk array as a single NTFS logical drive in an extended partition.

Consider the following with reference to Article 18? (a) No title, not being a military or academic distinction, shall be conferred by the State. (b) The citizen of India shall accept any title from any foreign State. (c) No person who is not a citizen of India shall, while he holds any office of profit or trust under the State, accept without the consent of the President any title from any foreign State. (d) The person holding any office of profit or trust under the State shall, without the consent of the President, accept any present, emolument, or office of any kind from or under any foreign State.

A

(a), (d)

B

(b), (c)

C

(a), (c)

D

(b), (d)

How many blocks away will Fred be from his starting p;ace if he travels two blocks north , then three blocks east, and then two blocks south?

A

Four

B

Two

C

Three

D

Zero

RAID level ________ refers to disk arrays with striping at the level of blocks, but without any redundancy.

Related Questions