Related Questions

A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque is twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. An external resistance is now tripled in the rotor circuit. Then the slip at which maximum torque occur for the same load torque is?
A centrifugal pump which circulates a hot liquid metal at 500 degree Celsius is driven by a 3600 rpm electric motor. The motor is coupled to the pump impeller by a horizontal steel shaft of dia 25 mm. Let us assume the motor temperature as 60 degree Celsius with the ambient air at 25 degree Celsius, what length of shaft should be specified between the motor and the pump? It may be presumed that the thermal conductivity of the shaft material is 35W/m K and that the convective film coefficient between the steel shaft and the ambient air is 15.7W/square m K
A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque equal to twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. The slip at the full load torque will be?
A 4-pole, 3-phase slip ring induction motor is used as a frequency changer. Its stator is excited from 3-phase, 50 Hz supply. A load requiring 3-phase, 20 Hz supply is connected to the star-connected rotor through three slip-rings of SRIM. At what two speeds the prime mover should drive the rotor of this SRIM?
A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque is twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. An external resistance is now tripled in the rotor circuit. Then the stator current will _________
In the 3-phase induction motor developed torque during plugging is ______ mechanical power developed in the braking region of the induction motor is ______
An induction motor X operating at the slip of 3%. An induction motor Y operating at slip of 40%.
The power input to the 3-phase induction motor is 60 kW. The stator losses total 1 kW. Find the mechanical power developed at the slip of 3%.
In a three phase induction motor of rotor impedance as (0.2+j0.2), rotor current in each phase lags behind the generated emf in that phase to rotor by a power factor angle of _________
A 3-phase induction motor is operating at slip ‘s’. If the slip is reversed, its slip at the instant will be _________