Bissoy.com
Doctors Medicines MCQs Q&A

In the 3-phase induction motor developed torque during plugging is ______ mechanical power developed in the braking region of the induction motor is ______

In the 3-phase induction motor developed torque during plugging is ______ mechanical power developed in the braking region of the induction motor is ______ Correct Answer positive, negative

Tem is positive while Pm will be negative in braking or plugging operation.

Related Questions

In the following question, sentences of a paragraph have been jumbled and labelled as A, B, C and D. You are required to rearrange the jumbled sentences of the paragraph and mark your response accordingly by selecting the correct option. A: An induction motor can, therefore, be made without electrical connections to the rotor. B: Three-phase squirrel-cage induction motors are widely used as industrial drives because they are self-starting, reliable and economical. C: An induction motor's rotor can be either wound type or squirrel-cage type. D: An induction motor or asynchronous motor is an AC electric motor in which the electric current in the rotor needed to produce torque is obtained by electromagnetic induction from the magnetic field of the stator winding.
Mechanical power developed in the braking region of the induction motor is _________
A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque is twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. An external resistance is now tripled in the rotor circuit. Then the slip at which maximum torque occur for the same load torque is?
For a three phase induction motor, maximum torque is double the full load torque and starting torque is 1.6 times the full load torque. To get a full load slip of 5%, percentage reduction in the rotor resistance should be?
Engines are rated at specified conditions. Then which of the following statements are correct? 1. Power developed increases as local temperature increases. 2. Power developed increases as local temperature decreases 3. Power developed is not dependent on local temperature. 4. Power developed increases as local atmospheric pressure increases. 5. Power developed increases as local atmospheric pressure decreases.
Consider the following statements: In the above figure, the curves pertain to the DC motor A. Speed vs Armature current characteristic of a DC shunt motor B. Torque vs Armature current characteristic of a DC shunt motor C. Speed vs Armature current characteristic of a DC series motor D. Torque vs Armature current characteristic of a DC series motor
Which of the following is correct formula for braking torque in plugging?
A braking torque of 2 kN-m is applied on a machine member to reduce the speed from 2000 rpm to 500 rpm in 10 sec. The specific heat of the brake material is 500 J/kg °C. The temperature rise for the brake per unit mass during braking period is
A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque equal to twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. The slip at the full load torque will be?
A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque is twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. The speed at the full load torque will be?