Bissoy.com
Doctors Medicines MCQs Q&A

Is supersaturation the driving force for all solution crystallization processes?

Is supersaturation the driving force for all solution crystallization processes? Correct Answer True

Supersaturation is the driving force for all solution crystallization processes where the supersaturated solution spontaneously separate into pure crystals of the solute and a less concentrated solution.

Related Questions

A 60% spirit solution is mixed with r% spirit solution in the ratio 1 : 3 such that a s% spirit solution is obtained. When a (s/3)% spirit solution is mixed with 55% spirit solution in equal ratio, an (r/2)% spirit solution is obtained. Which of the following can be determined? (A) Value of ‘r’ (B) Value of ‘s’ (C) Volume of the 60% spirit solution mixed initially (D) If 9 liters of r% spirit solution was mixed initially, what was the volume of the s% spirit solution thus obtained?
A chemical solution appears green when the salt concentration is 8 grams per litre (gpl) and red when it is 10 gpl. Pure water was added to the solution of 1 litre of 15 gpl solution till it turned green. Then 125 ml of the green solution is taken out and x grams of salt is added to the green solution to make it red. Another 500 ml of the final solution was taken out and y litres of green solution is added to get a resultant solution of concentration 9.6 gpl.  Assume adding salt doesn’t change its volume and find the ratio of x and y. 
Crystallization of melts is very similar to crystallization of solutions, what is the factor that differentiates the crystallization of melt and solutions?
Are these statements about the contact equilibrium processes true? Statement 1: Gas absorption, crystallization comes under the category of contact equilibrium processes. Statement 2: Contact equilibrium processes does not depend on the concentration gradient.
A shared variable x, initialized to zero, is operated on by four concurrent processes W, X, Y, Z as follows. Each of the processes W and X reads x from memory, increments by one, stores it to memory, and then terminates. Each of the processes Y and Z reads x from memory, decrements by two, stores it to memory, and then terminates. Each process before reading x invokes the P operation (i.e., wait) on a counting semaphore S and invokes the V operation (i.e., signal) on the semaphore S after storing x to memory. Semaphore S is initialized to two. What is the maximum possible value of x after all processes complete execution?
Certain facts about Force are given below. Identify the true information. A. Force is a scalar quantity. B. Gravitational force is the weakest force. C. Electromagnetic force is the strongest force. D. When sum of all forces acting on a body is zero, the body is said to be in a state of equilibrium.
Solution X contains 7% (by weight) of liquid M and solution Y contains 14.5% (by weight) of liquid M. If 3 grams of solution X is mixed with 2 grams of solution Y, then liquid M accounts for what percent of the weight of the resulting solution?
100 kg of solution A is mixed with 60 kg of solution B . If solution A has tin and copper in the ratio 1: 4 and solution B has lead and tin in the ratio 3 :2 then what is the amount of tin in the new solution?
Solution X is 10% percent alcohol by volume, and solution Y is 30 percent alcohol by volume. How many milliliters of solution Y must be added to 200 milliliters of solution X to create a solution that is 25 percent alcohol by volume?
What happens when a solution of an acid is mixed with a solution of a base in a test tube? (i) The temperature of the solution increases. (ii) The temperature of the solution decreases. (iii) The temperature of the solution remains the same. (iv) Salt formation takes place.