Bissoy.com
Doctors Medicines MCQs Q&A

______________ of moisture measurement is based on chemical reactions.

______________ of moisture measurement is based on chemical reactions. Correct Answer Karl Fischer method

Karl Fischer Method of moisture measurement is based on chemical reactions. A chemical reaction happens where the water is separated chemically from the rest of the sample. The water is then moved to other cell where it is measured. That measurement is equated with the initial mass of the sample and then moisture content is calculated.

Related Questions

In the question below are given six statements followed by four conclusions numbered I, II, III and IV. You have to take the given statements to be true even if they seem to be at variance with commonly known facts. Read all the conclusions and then decide which of the given conclusions logically follows from the given statements disregarding commonly known facts. Statements: All Petrol are Gasoline. No petrol is Water. Some Water are Gas. Some Moisture are Gas. All Gasoline are Fire No Moisture is Fire Conclusions: I. Some Moisture are Gasoline. II. Some Water are Moisture. III. Some Gasoline are Gas. IV. Some Petrol are Moisture.
Which among the following are the anthropometric procedures for measurement?
1. Length measurement
2. Head circumference measurement
3. Weight measurement
4. Waist measurement`
Equilibrium moisture of a solid is equal to the total moisture minus free moisture. Which of the following substances will have maxi-mum equilibrium moisture?
200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 × 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)
A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids)
Equilibrium moisture of a solid is equal to the total moisture minus free moisture. Which of the following substances will have maximum equilibrium moisture?
It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%).
Consider the following statements for dynamic characteristics of a measurement system: 1. Fidelity is defined as the degree to which a measurement system indicates changes in the measured quantity without any dynamic error. 2. Dynamic error is the difference between the true value of the quantity changing with time and the value indicated by the measurement system if no static error is assumed. 3. Measuring lag is the retardation in the response of a measurement system to changes in the measured quantity. Which of the above statements are correct?
What of these can be used as a reasonable model for measurement system capability studies? Here y,x and ε denote the observed measurement, true measurement, and the measurement error respectively.
Which among the following are the procedures for taking measurements?
1. Body measurement
2. Sleeves measurement
3. Shirt measurement
4. Pant measurement