Bissoy.com
Doctors Medicines MCQs Q&A

In the ___________ technique, a photosensitive polymer solution and a photomask are normally used.

In the ___________ technique, a photosensitive polymer solution and a photomask are normally used. Correct Answer photolithographic

In the photolithographic method, a photosensitive polymer arrangement and a photomask are typically utilized. The piece of the polymer arrangement not secured by the cover is presented to the light of a specific wavelength, which incites cross-connecting.

Related Questions

A 60% spirit solution is mixed with r% spirit solution in the ratio 1 : 3 such that a s% spirit solution is obtained. When a (s/3)% spirit solution is mixed with 55% spirit solution in equal ratio, an (r/2)% spirit solution is obtained. Which of the following can be determined? (A) Value of ‘r’ (B) Value of ‘s’ (C) Volume of the 60% spirit solution mixed initially (D) If 9 liters of r% spirit solution was mixed initially, what was the volume of the s% spirit solution thus obtained?
A chemical solution appears green when the salt concentration is 8 grams per litre (gpl) and red when it is 10 gpl. Pure water was added to the solution of 1 litre of 15 gpl solution till it turned green. Then 125 ml of the green solution is taken out and x grams of salt is added to the green solution to make it red. Another 500 ml of the final solution was taken out and y litres of green solution is added to get a resultant solution of concentration 9.6 gpl.  Assume adding salt doesn’t change its volume and find the ratio of x and y. 
Polymer A, also available as copolymer with trifluoroethylene, is a crystalline polymer with a melting point greater than 160 ᵒC and is used in coatings and insulation materials. What is the name of polymer A?
Melt spinning of polymers involves the forcing of polymer melt through spinnerettes (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres.
A glass reinforced polymer composite comprises of 35 volume % glass fiber and 65 volume % of polymer resin. The elastic moduli of glass and polymer resin are respectively 70 GPa and 3 GPa. The elastic modulus of the composite (in GPa) under iso-strain state is
100 kg of solution A is mixed with 60 kg of solution B . If solution A has tin and copper in the ratio 1: 4 and solution B has lead and tin in the ratio 3 :2 then what is the amount of tin in the new solution?
Suppose you have four test tubes labelled as 'A', 'B', 'C' and 'D'. 'A' contains plain water, 'B' contains solution of an alkali, 'C' contains solution of an acid, and 'D' contains solution of sodium chloride. Which one of these solution will turn phenophthalein solution pink?
Solution X contains 7% (by weight) of liquid M and solution Y contains 14.5% (by weight) of liquid M. If 3 grams of solution X is mixed with 2 grams of solution Y, then liquid M accounts for what percent of the weight of the resulting solution?
Solution X is 10% percent alcohol by volume, and solution Y is 30 percent alcohol by volume. How many milliliters of solution Y must be added to 200 milliliters of solution X to create a solution that is 25 percent alcohol by volume?
Solution X is percent alcohol by volume, and solution Y is 30 percent alcohol by volume. How many milliliters of solution Y must be added to 200 milliliters of solution X to create a solution that is 25 percent alcohol by volume?