Bissoy.com
Doctors Medicines MCQs Q&A

Typical liver shear moduli range from ___________

Typical liver shear moduli range from ___________ Correct Answer 200 to 5000 Pa

The elastic (Young’s) modulus E and shear modulus G are proportions of a material’s capacity to oppose distortion under a connected burden. Ordinary liver shear moduli run from 200 Pa to 5 kPa, and run of the mill versatile moduli run from ∼1 to 20 kPa. On the off chance that the liver is thought to be an incompressible material (i.e., to keep up a steady volume under mechanical stacking), which is a typical supposition in numerous biomechanics thinks about, at that point to a first guess the flexible modulus is generally identical to multiple times the shear modulus (E ≈ 3G).

Related Questions

A liver performs multiple functions and is also one of the heaviest organs in the body, second only to the brain. So, when an artificial liver is being produced, recreating what physical property of the liver poses a challenge?
X' knows that 'Y' is suffering from enlarged liver. Being a doctor, 'X' knows that if he gives a first blow to 'Y' in the region with moderate force, it would result in rupture of Y's liver and is likely to cause his death. Knowing this, 'X' gives 'Y' a fist blow which ruptures 'Y's liver and causes his death, 'X' is:
The Rheological behaviour of concrete, when represented by shear stress vs rate of shear, is characterized as Where : τ shear stress, Τ0 = (initial) yield value, μ = at-point plastic viscosity, γ̇ = at point rate of shear.
Which of the following factors are affecting critical shear stresses? 1. Purity of metals reduces the critical shear stress 2. Surface films greatly enhance the critical shear stress 3. Rise in temperature 4. Rate of deformation and the extent of initial deformation also help in raising the critical shear stress
The ultimate shear force at a section of an RCC beam is 300 kN. The shear resisted by concrete is 77.5 kN. What is the shear for which shear reinforcement is required?
Statement 1: Considering the equation, μ_a= τ/γ = Kγ(n-1) , for pseudo plastic fluids, n<1 and they’re called Shear thinning liquids and dilatant fluids are called Shear thickening liquids as n>1. Statement 2: Cooked starch solution is a Shear thinning liquid and dairy cream is a Shear thickening liquid.
Tresca or maximum-shear stress criteria assumes that yielding occurs when the maximum shear stress reaches a value of the shear stress in the uniaxial tension test. Assume the principal stress being σ1, σ2, σ3 where σ1 is largest, and σ3 is the smallest principal stresses. Find the value of minimum shear stress to cause yielding, given that yield stress in tension is equal to σo?
If number of rivets subjected to single shear per pitch length is 2 and those subjected to double shear per pitch length are 3, then find the shear resistance of rivets is diameter of rivets is 20mm and permissible shear 60N/mm².
If nominal shear stress $${\tau _{\text{v}}}$$ exceeds the design shear strength of concrete $${\tau _{\text{c}}}$$, the nominal shear reinforcement as per IS : 456-1978 shall be provided for carrying a shear stress equal to
Shear stress versus shear rate behavior of four different types of fluids (I, II, III and IV) are shown in the figure below.
Basic Principles of Biotechnology mcq question image
Which one of the following options is correct?