Bissoy.com
Doctors Medicines MCQs Q&A

Which parameter allows the transfer of solute when the liquid flows through a solid surface?

Which parameter allows the transfer of solute when the liquid flows through a solid surface? Correct Answer Molecular diffusion

Molecular diffusion allows the transfer of solute, when a liquid flows past a solid surface a stagnant boundary liquid layer is formed close to the surface and within these boundary layers the transfer of solutes takes place.

Related Questions

Consider a given volume of liquid at a temperature T below Tm with a free energy G’. If some of the atoms of the liquid cluster together to form a small sphere of solid, the free energy of the system will change to G, given by________ (Assume V1 volume of the solid sphere, V2 volume of liquid, A is the solid/liquid interfacial area, γ solid/liquid interface free energy, G1 and G2 are the free energies per unit volume of solid and liquid respectively).
“What is the different between height and radius of solid cylinder?” Which of the following option is sufficient alone to find the answer? A) A solid cylinder is made by melting a solid sphere. The radius of cylinder is 3 times the radius of a circle whose area is 154 sq.m. Height of cylinder is equal to the height of cone whose volume is 2772 cubic meters. B) Area of a rectangle whose longer side is ¾ times the radius of a solid cylinder, is 168 sq.m and, Volume of solid cylinder is 2772 cubic meters and its height is 18 m. C) A metallic cone of radius 15m and height 35m is melted into the solid cylinder of radius equal to the radius of a circle whose area is equal to the area of rectangle whose sides are in the ratio 4 : 3 respectively. D) The curved surface area of the solid cylinder is 3 time the surface area of a sphere of radius 7m and height of cylinder is equal to the height of a metallic cone whose curved surface area is 308 sq.m. 
The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface)
The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where $${I_{\text{G}}}$$ = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface and x = Depth of centre of gravity of the immersed surface from the liquid surface)
A liquid solid mixture with 10% solid and 90% liquid is input to a dryer, some of the liquid evaporated and the product contains 60% solid and 40% liquid, what is the ratio of an amount of water evaporated and amount of input?
Consider the following pairs. S. No. Dispersed Phase Dispersing Medium Type 1. Liquid Gas Aerosol 2. Gas Liquid Foam 3. Liquid Liquid Emulsion 4. Liquid Solid Solid Sol   Which are the correct pairs?
Estimate the interfacial solute concentration in the two liquids when the solute concentration is 45000 kg-moles/m3, interfacial solute concentration in liquid is 40000 kg-moles/m3, diffusivity is 2.5 × 10-11 m2/s and the length of the tube is 5m3 and the partition coefficient is 0.25.
A stream of air at 100 kPa pressure and 300 K is flowing on the top surface of a thin flat sheet of solid naphthalene of length 0.2 m with a velocity of 20 m/sec. The other data are: Mass diffusivity of naphthalene vapor in air = 6 * 10 –6 m2/sec Kinematic viscosity of air = 1.5 * 10 –5 m2.sc Concentration of naphthalene at the air-solid naphthalene interface = 1 * 10 – 5 kmol/m3 Calculate the overage mass transfer coefficient over the flat plate. Note: For heat transfer over a flat plate, convective heat transfer coefficient for laminar flow can be calculated by the equation. Nu = 0.664 ReL1/2 Pr1/3 you may use analogy between mass and heat transfer.
Consider the following statements regarding Thyristor: 1. It conducts when forward biased and positive current flows through the gate 2. It conducts when forward biased and negative current flows through the gate 3. It commutates when reverse biased and negative current flows through the gate 4. It commutates when the gate current is withdrawn Which of these statement(s) is/are correct?
In the following question below some statements are given followed by some conclusions. Taking the given statements to be true even if they seem to be at variance from commonly known facts, read all the conclusions and then decide which of the given conclusions logically follows the given statements. Statements: No solution is mixture. Each solvent is solute. All solute are solution. Conclusions: I. No solvent is mixture. II. Some solution is solvent. III. Some solute is mixture.