Related Questions

A rotary drum filter with 30% submergence is used to filter concentrated aqueous slurry of calcium carbonate containing 15lb of solids per cubic foot of water. The pressure–drop is 2011Hg. If the filter cake contains 50% mixture (wet basis), calculate the filter area required to filter 10 gal/min of slurry. The filter cycle time is 5 min. The specific cake resistance depends on the pressure–drop as: α (ft/lb) = α (Δp)0.26, where α = 2.90×1010 Viscosity of the filtrate = 6.72×10-4 lb/ft-s. Density of calcium carbonate = 168.8 lb/ft3. Neglect filter medium resistance.
Butterworth lowpass filter has a parameter, filter order, determining its functionality as very sharp or very smooth filter function or an intermediate filter function. If the parameter value is very high, the filter approaches to which of the following filter(s)?
Butterworth lowpass filter has a parameter, filter order, determining its functionality as very sharp or very smooth filter function or an intermediate filter function. If the parameter value is of lower order, the filter approaches to which of the following filter(s)?
The filter order of a Butterworth lowpass filter determines whether it is a very sharp or extremely smooth filter function, or an intermediate filter function. Which of the following filters does the filter approach if the parameter value is very high?
Toggle Filter আইকনটি-i. Remove filter হিসেবে কাজ করেii. Undo filter হিসেবে কাজ করে iii. Apply filter হিসেবে কাজ করেনিচের কোনটি সঠিক?
Statement 1: Filter cake increases the efficiency of filtration. Statement 2: Filter aid is added to the filter cake when the filter cake is the desired product.
Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is
Two semiconductor material have exactly the same properties except that material A has a bandgap of 1.0 eV and material B has a bandgap energy of 1.2 eV. The ratio of intrinsic concentration of material A to that of material B is
AT Co makes a single product and is preparing its material usage budget for next year Each unit of product requires 2kg of material, and 5,000 units of product are to be produced next year Opening inventory of material is budgeted to be 800 kg and AT co budgets to increase material inventory at the end of next year by 20%.The material usage budget for next year is
Raw material purchased:
1st January, 600 units @ Rs. 12 per unit
12th January, 500 units @ Rs. 14 per unit
21st January, 300 units @ Rs. 13 per unit
Raw material issued for manufacture:
3rd January 300 units
5th January 124 units
15th January 250 units
16th January 300 units
Raw material returned to stores from manufacturing department on 14th January, 50 units. The material is issued on First-in-First out method.
The value of material remaining in store on 21st January will be: