Bissoy.com
Doctors Medicines MCQs Q&A

Which type of drier is widely used for the production of dry yeast?

Which type of drier is widely used for the production of dry yeast? Correct Answer Spray driers

Spray driers are the most widely used. A suspension with 10–20% yeast is atomized into a drying chamber and dried with hot air. The drying temperature and time are 50°C and 10–20 min, respectively.

Related Questions

In a rotary drier, the average retention time of solid is(where Z = length of the drier, metres ρ = apparent solid density, kg/m³ L = flow rate of dry solids, kg/see. m² drier cross-section H = hold up of solid.)
In a rotary drier, the average retention time of solid is (where Z = length of the drier, metres; ρ = apparent solid density, kg/m3; L = flow rate of dry solids, kg/see.m2 drier cross-section; H = hold up of solid.)
In a laboratory test run, the rate of drying was found to be 0.5 × 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is
___________________ is the most reactive of drier metals and is generally regarded as a surface drier.
Consider the following grammar and the semantic actions to support the inherited type declaration attributes. Let X1, X2, X3, X4, X5 and X6 be the placeholders for the non-terminals D, T, L or L1 in the following table: Production rule Semantic action D → T L X1.type = X2.type T → int T.type = int T → float T.type = float L → L1, id X3.type = X4.type addType(id.entry, X5.type) L → id addType(id.entry, X6.type)   Which one of the following are the appropriate choices for X1, X2, X3 and X4?
There are five crude oil refining companies in India namely, A, B, C, D, and E. Statements: I. The production of Company B is more than that of Company A but not more than that of Company E. II The production of Company C is more than the production of Company B but NOT as much as that of Company D. III. The production of E is NOT as much as the production of Company D. Which of these statements is/are sufficient to answer the question that the production of which of the following companies is the highest?
The given bar graph represents data of the production of paper (in ten lakh tonnes) by three different companies X, Y and Z during the years 2008 to 2012. The x-axis shows the 'years' and the y-axis represents the 'production of paper (ten lakh tonnes)'. (Note: The data shown is only for mathematical exercise. They do not represent actual figures.)  The total production of Company Y during 2008 and 2009 and Company X for 2011 and 2012 taken together is p% (p is correct to the nearest integer) more than the total production of Company Z during 2010, 2011 and 2012. The total production of Company Z during 2008 and 2009 taken together is q% (q is correct to the nearest integer) less than the total production of Company X during 2008, 2009 and 2012 and Company Y during 2010 and 2011 all together.  What is the positive difference between p and q ? 
Consider the following statements in connection with deflection-type and null-type instruments: 1. Null-type instruments are more accurate than the deflection-type ones. 2. Null-type of instrument can be highly sensitive compared to a deflection-type instrument. 3. Under dynamic conditions, null-type instruments are less preferred to deflection-type instruments. 4. Response is faster in null-type instruments as compared to deflection-type instruments. Which of the above statements are correct?
Student A rub solid baking soda on dry litmus paper, B rub metal oxide on dry litmus paper, C dip litmus paper in vinegar, D dip litmus paper in aqueous solution of baking soda. The observations were made by student A, B, C, and D should be- Student Effect on dry red litmus paper Effect on dry blue litmus paper A Color Changed to blue No change B No change Color changed to red C No change Color changed to red D Color Changed to blue       Color changed to red The correct observation was made by the student
200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 × 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)