Bissoy.com
Doctors Medicines MCQs Q&A

If air consists of 77% by weight of nitrogen and 23% by weight of oxygen calculate: (i) the mean molecular weight of air, (ii) the mole fraction of oxygen, (iii) the concentration of oxygen in mole/m3 and kg/m3 if the total pressure is 1.5 atmospheres and the temperature is 25 °C.

If air consists of 77% by weight of nitrogen and 23% by weight of oxygen calculate: (i) the mean molecular weight of air, (ii) the mole fraction of oxygen, (iii) the concentration of oxygen in mole/m3 and kg/m3 if the total pressure is 1.5 atmospheres and the temperature is 25 °C. Correct Answer 28.8, 0.21, 0.013 mole/m3

Related Questions

In order to prepare Lithium nitride, air is passed gently over a reactor. Suppose that Nitrogen diffuse to a length 5cm before getting reacted with Lithium. Nitrogen reacts with lithium quickly so that partial pressure of Nitrogen at that point is 0. Reactor is a cylinder of length 10cm and diameter 2cm. Assume air to be a mixture of Nitrogen and Oxygen only. The temperature is 298K and total pressure 1atm. Diffusivity of N2 in O2 is 2*10-5m2/s. Calculate the Molar flux (mol/m2.s) of N2 at a distance of 2.5cm from the top with respect to an observer moving with twice the mass average velocity a direction towards the liquid surface. (R=8.205*10-5m3atmK-1mol-1). Assume z=0 at the top of the reactor.
Two feeds, 10 mole with 5 J/mole and 20 mole with 15 J/mole, product contains two streams, 5 mole with 10 J/mole and P with 25 J/mole, what is the value of P?
Two feeds, 5 mole with 25 J/mole and F with 5 J/mole, product contains two streams, 5 mole with 10 J/mole and 10 mole with 15 J/mole, what is the value of F?
In the carbonation of a soft drink, the total quantity of carbon dioxide required is the equivalent of 3 volumes of gas to one volume of water at 0⁰C and atmospheric pressure. Calculate (i) the mass fraction and (ii) the mole fraction of the CO2 in the drink, ignoring all components other than CO2 and water. Basis 1 m3 of water = 1000 kg Volume of carbon dioxide added = 3 m3 From the gas equation, pV = nRT 1 x 3 = n x 0.08206 x 273 n = 0.134 mole. Molecular weight of carbon dioxide = 44 And so weight of carbon dioxide added = 0.134 x 44 = 5.9 kg
The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream, and calculate the moles of nitrogen entering the reactor and in the recycle stream?
Estimate the diffusion coefficient for ammonia in air t 25 degree Celsius temperature and one atmospheric pressure. For ammonia, Molecular weight = 17 Molecular volume = 25.81 cm3/gm mole For air, Molecular weight = 29
Which of the following statements about partial pressure are correct? Statement 1: The partial pressure of each gas in a mixture is not proportional to its mole fraction.. Statement 2: The partial pressure of each gas is the product of the total pressure and the mole fraction of that gas.
Three feeds, 10 mole with H = 5 J/mole, 10 mole with H = 15 J/mole and 5 mole with 20 J/mole, what is the enthalpy of the products?
Three feeds, 10 mole with H = 25 J/mole, 5 mole with H = 10 J/mole and 15 mole with 20 J/mole, what is the enthalpy of the products?
Three feeds, 10 mole with H = 15 J/mole, 20 mole with H = 5 J/mole and F1 with 20 J/mole, if enthalpy of the products is H = 15 J/mole, what is the value of F1?