Bissoy.com
Doctors Medicines MCQs Q&A

Which of the following is correct for two blade propeller?

Which of the following is correct for two blade propeller? Correct Answer Diameter d = 22*(Hp)0.25

An initial estimation of propeller diameter is given by, Diameter d = 22*(Hp)0.25. Where, Hp is horse power. Above equation provides approximate value for 2 bladed propeller diameter.

Related Questions

A simple impulse turbine has a mean blade speed of 250 m/s. The nozzle angle is 20° and the steam velocity from the nozzle is 600 m/s. The turbine uses 3000 kg/h of steam. The blade outlet angle is 25°. Determine the amount of energy converted to heat by blade friction if the blade friction factor is 0.86.
In a single row impulse turbine, the absolute velocity of steam leaving the turbine is 900 m/s. The nozzle angel is 20°. The mean blade speed is 300 m/s. The inlet blade angle is equal to the outlet blade angle. Determine the angle made by the discharging steam with the tangent of the wheel at the exit of moving blade. Neglect friction on turbine blades.
Let’s consider a propeller aircraft propeller diameter of 24 feet then, what would be the minimum value of clearance that is required for safe operation of propeller typically?
Determine thrust of propeller if propeller efficiency is 85%. Propeller is assumed to be operated with 1200 bhp and 350ft/s of velocity.
In a single row impulse turbine, steam leaves the nozzle at 600 m/s. The nozzle angle and the mean blade speed is 25° and 200 m/s. The blade velocity coefficient is 0.8. Determine the blade outlet angle if the steam leaves the turbine blades axially.
In a Parson’s reaction turbine, the outlet angle of blade is 25°. Calculate the work done per second by the blades if the blade mean blade speed is 60 m/s and the absolute velocity of the steam leaving the nozzle is 120 m/s. The mass flow rate of steam is 0.1 kg per second.
Let’s consider we need to design a propeller engine which has 3 blades. What will be the typical value of propeller diameter? Engine is expected to produce 400 Hp of power.
Propeller has diameter of 25 unit. What will be the static tip speed of the propeller? (Given n = 1200rpm.)
If propeller has static tip speed of 600 ft. per second then, find diameter of propeller. Given n = 1250rpm.
If a propeller is designed to have 200 Hp then find the appropriate diameter for the propeller. Consider 2 blades.