As the strain rate of deformation increases, the temperature of the workpiece due to internal heating ____________

From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.

A

P, Q

B

Q, R

C

Q, S

D

R, S

The true strain rate is given as ϒ, and conventional strain rate is given as ε. The engineering strain is equal to e. The relationship between conventional strain rate and true strain rate is _______

A

ϒ = ε

B

ϒ = ε/e

C

ϒ = ε/(1+e)

D

ϒ = ε*e

Engines are rated at specified conditions. Then which of the following statements are correct? 1. Power developed increases as local temperature increases. 2. Power developed increases as local temperature decreases 3. Power developed is not dependent on local temperature. 4. Power developed increases as local atmospheric pressure increases. 5. Power developed increases as local atmospheric pressure decreases.

A

1 and 4

B

3 and 4

C

3 and 5

D

2 and 4

The bypass factor (B. P. F.) in case of sensible heating of air is (Where td₁ = Dry bulb temperature of air entering the heating coil, td₂ = Dry bulb temperature of air leaving the heating coil, and td₃ = Dry bulb temperature of heating coil)

A

(td₂ - td₃)/(td₃ - td₁)

B

(td₃ - td₂)/(td₃ - td₁)

C

(td₃ - td₁)/(td₂ - td₃)

D

(td₃ - td₁)/(td₃ - td₂)

The bypass factor (B.P.F.) in case of sensible heating of air is (Where td₁ = Dry bulb temperature of air entering the heating coil, td₂ = Dry bulb temperature of air leaving the heating coil and td₃ = Dry bulb temperature of heating coil)

A

$$\frac{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}$$

B

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_2}}}{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}$$

C

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}{{{\text{t}}{{\text{d}}_2} - {\text{t}}{{\text{d}}_3}}}$$

D

$$\frac{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_1}}}{{{\text{t}}{{\text{d}}_3} - {\text{t}}{{\text{d}}_2}}}$$

Whenever some external system of forces acts on a body, it undergoes some deformation. As the body undergoes some deformation, it sets up some resistance to the deformation. This resistance per unit area to deformation, is called

A

Strain

B

Stress

C

Pressure

D

Modulus of elasticity

Which of the following machine is based upon the principle that the rotating edge of the tool exerts a large force on the workpiece and holes are being created in the workpiece? The material is removed from the workpiece by the shearing and extrusion process.

A

Drilling machine

B

Shaper machine

C

Lathe machine

D

Milling machine

The relationship between the stress and strain rate is given as σ=Cϒm, where m is strain rate sensitivity. The strain rate sensitivity _____________ with increase in temperature.

A

increases

B

decreases

C

remains constant

D

no relationship

Which of the following statements are true/false?
1. A minimum rate of wages for the time spent by employees for the production of output is minimum time rate.
2. Minimum piece rate is the rate based on the quantity of the output employees have produced.
3. The guaranteed time rate is a minimum rate of remuneration to apply in the case of employees employed on piece work for the purpose of securing to such employees a minimum rate of wages on a time work basis.
4. A minimum rate of remuneration to apply in the case of employees employed on piece work for the purpose of securing to such employees a minimum rate of wages on a time work basis is overtime rate.

A

1, 2, 3 and 4 are true

B

1, 3 are true and 2, 4 are false

C

2, 4 are true and 1, 3 are false

D

3, 4 are true and 2, 1 are false

The following flow curve shows the deformation behavior of the material in the plastic region. The material is deformed till ε1 and released; the material immediately reached to strain ε2. And the time strain reached to ε3. So, there is a delayed recovery of strain. This is behavior of material is called _________

A

recoverable elastic strain

B

delayed elastic strain

C

anelastic behavior

D

plastic strain

As the strain rate of deformation increases, the temperature of the workpiece due to internal heating ____________

Related Questions