Bissoy.com
Doctors Medicines MCQs Q&A

The slip bands inside a grain during creep was first observed by which instrument?

The slip bands inside a grain during creep was first observed by which instrument? Correct Answer Phase-contrast microscopy

The first-ever live observation of slip band in creep was made by Mclean using phase-contrast microscopy and able to detect very fine slip band lines.

Related Questions

The formation of sub-grain structure inside the lattice is a phenomena observed in the high-temperature creep. The number of new sub-grain formed are highest in which stage of creep?
Kamala has three cylindrical containers, each with radius 20 cm that she wants to fill with grain. If her bag of grain contains 100 kg of grain, and she fills all three containers to a height of 70 cm, how much grain will be left in the bag, if 1 kg grain occupies 3000 cm3 space? (Use π = \(\frac{{22}}{7}\))
Study the following statements regarding creep.
i) Creep is greater on curves than on tangent railway track
ii) Creep in new rails is more than that in old rails
iii) Creep is more on steep gradients than on level track
The correct answer is
Consider the following statements regarding bands to be provided for strengthening masonry work in masonry buildings constructed in zone III, IV and V.
(i) Lintel band is provided at lintel level on partition walls,
(ii) Gable band is provided at top of gable masonry below the purlins,
(iii) The bands shall be to full width of the wall and not less than 7.5 cm in depth,
(iv) The bands shall be made of reinforced concrete only.
of these statements, the correct statements are
Consider the following statements about Bligh’s Creep Theory. i. Creep length is the length of path traversed by percolating water ii. To increase the path of percolation vertical cut-off or sheet piles can be provided iii. Loss of head per unit creep length is hydraulic gradient iv. Bligh gave no criteria for the safety of weir against undermining Which of the following statements are correct?
Inhomogeneous deformation of crystal results in regions of different orientation called deformation bands. Deformation bands have been observed in both fcc and bcc metals, but not in hcp metals.
A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque is twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. An external resistance is now tripled in the rotor circuit. Then the slip at which maximum torque occur for the same load torque is?
A 10 m high slope of dry clay soil (unit weight = 20 kN/m3), with a slope angle of 450 and the circular slip surface, is shown in the figure (not drawn to the scale). The weight of the slip wedge is denoted by. W. The undrained unit cohesion (Cu) is 60 kPa. The factor of safety of the slope against slip failure, is
Natural numbers 4 to 15 are written on different slips (one number on one slip), kept in a box and mixed well. Renu picks up one slip from the box without looking into it. What is the probability that this slip bears a prime number?
Numbers 10 to 60 are written on separate slips (one number on one slip), they are kept in a box and then they are mixed well. One slip is chosen from the box without looking into it. What is the probability that the number on the chosen slip is divisible by both 2 and 3?