Bissoy.com
Doctors Medicines MCQs Q&A

In the design of Kettle reboiler given by Kern for isothermal boiling, it is assumed that the degree of sub-cooling and super-heating of the cold fluid is ___________

In the design of Kettle reboiler given by Kern for isothermal boiling, it is assumed that the degree of sub-cooling and super-heating of the cold fluid is ___________ Correct Answer Negligible

The Kern method of designing reboilers considers only the saturated steam operation regime and not the super/sub-heated steam as it involves the calculation of heat gain and loss of the steam besides its latent heat of vaporisation.

Related Questions

Let D be a simple graph on 10 vertices such that there is a vertex of degree 1, a vertex of degree 2, a vertex of degree 3, a vertex of degree 4, a vertex of degree 5, a vertex of degree 6, a vertex of degree 7, a vertex of degree 8 and a vertex of degree 9. What can be the degree of the last vertex?
Kettle reboiler is also called a ___________ reboiler.
Jacketed kettle is preferred for kettle type reboiler.
Study the following statements.i) The displacement method is more useful when degree of kinematic indeterminacy is greater than the degree of static indeterminacy.ii) The displacement method is more useful when degree of kinematic indeterminacy is less than the degree of static indeterminacy.iii) The force method is more useful when degree of static indeterminacy is greater than the degree of kinematic indeterminacy.iv) The force method is more useful when degree of static indeterminacy is less than the degree of kinematic indeterminacy.The correct answer is
A water line is buried underground in dry soil that has an assumed initial temperature of 4.5 degree Celsius. The pipe may have no flow through it for long period of time, yet it will not be drained in order that no freezing occurs, the pipe must be kept at a temperature not lower than 0 degree Celsius. The pipe is to be designed for a 30 hour period at the beginning of which the soil surface temperature suddenly drops to – 17 degree Celsius. Workout the minimum earth covering needed above the water pipe so as to prevent the possibility of freezing during 36 hour cold spell. The soil in which the pipe is buried has the following properties Density = 640 kg/m3 Specific heat = 1843J/kg degree Thermal conductivity = 0.345 W/m degree
The boiling occurs inside the tubes in ___________ thermosyphon reboiler and inside shell in ____________ thermosyphon reboiler.
Superheating of vapour and subcooling of liquid ____ the refrigerating effect.
In combined stress theory, kern of a section is that area of the cross-section whereupon loading there will be no tension anywhere in the cross-section. So, the kern of an I-section is
Simplify : $$\frac{{\frac{5}{3} \times \frac{7}{{51}}{\text{ of }}\frac{17}{5} - \frac{1}{3}}}{{\frac{2}{9} \times \frac{5}{7}{\text{ of }}\frac{{28}}{5} - \frac{2}{3}}}{\kern 1pt} {\kern 1pt} = ?$$
The rear window of an automobile is made of thick glass i.e. AB = 5 mm and thermal conductivity is 0.8 W/m degree. To defrost this window, a thin transparent film type heating element has been fixed to its inner surface. For the conditions given below, determine the electric power that must be provided per unit area of window if a temperature 5 degree Celsius is maintained at its outer surface. Interior air temperature and the corresponding surface coefficient are 20 degree Celsius and 12 W/m2 degree. Surrounding air temperature and the corresponding surface coefficient are – 15 degree Celsius and 70 W/m2 degree. Electric heater provides uniform heat flux