Bissoy.com
Doctors Medicines MCQs Q&A

Which one of the following reboiler uses a 1-2shell and tube heat exchanger?

Which one of the following reboiler uses a 1-2shell and tube heat exchanger? Correct Answer Horizontal thermosyphon reboiler

Given in the following figure the horizontal thermosyphon with the 1-2shell and tube heat exchanger-

Related Questions

Plate type heat exchangers have less surface area as compared to a similar Shell and Tube heat exchanger. A Shell and Tube Heat Exchanger of equivalent area weigh six-seven times less than a Plate Type heat exchanger.
In a counter flow heat exchanger, water flowing through a tube of 10 cm inner diameter is heated by steam condensing on the outside of the tube. The convective film coefficient on the water and steam side are estimated to be 12000 and 20000 k J/m2 hr degree. Neglecting tube thickness and its resistance to heat flow, workout the overall heat transfer coefficient for the heat exchanger
Air is to be heated by condensing steam. Two heat exchangers are available (i) a shell and tube heat exchanger and (ii) a finned tube heat exchanger. Tube side heat transfer area are equal in both the cases. The recommended arrangement is
Which of the following statements about Printed circuit heat exchanger are correct? Statement 1: Printed circuit heat exchanger is an example for direct heat exchanger. Statement 2: It has high heat transfer surface area per unit volume of the exchanger.
Consider we have a Double Pipe Heat Exchanger, with the inner tube of Outer diameter 20mm (thickness 2mm) and outer tube of inner diameter 30mm. We have two fluids A & B, we desire to have their flow rates as 15 Kg/s and 21 Kg/s respectively. Calculate the convective heat transfer coefficient from tube to annulus side. (Given Nusselt number on tube side = 496 and K = 15W/mK)
Forced air flows over a convection heat exchanger in a room heater, resulting in a convective heat transfer coefficient 1.136 k W/m2 K. The surface temperature of heat exchanger may be considered constant at 65 degree Celsius, and the air is at 20 degree Celsius. Determine the heat exchanger surface area required for 8.8 k W of heating
A single pass shell and tube heat exchanger, consisting of a bundle of 100 tubes (inner diameter 25 mm and thickness 2 mm) is used for heating 28 kg/s of water from 25 degree Celsius to 75 degree Celsius with the help of a steam condensing at atmospheric pressure on the shell side with condensing heat transfer coefficient 5000 W/m2 degree. Make calculation for overall heat transfer coefficient based on the inner area. Take fouling factor on the water side to be 0.002 m2 degree/W per tube and neglect effect of fouling factor on the shell side and thermal resistance of the tube wall
Which one of the following reboiler uses a shell and tube heat exchanger?
The advantage of using a 1 - 2 shell and tube heat exchanger over a 1 - 1 shell and tube heat exchanger is
Study the following information carefully and answer the questions that follows. 5 persons Anil, Bhagat, Ishan, Deepak and Parmish use 5 different apps namely, WhatsApp, Instagram, Twitter, Facebook and LinkedIn. They all wear different brands of shoes namely, Adidas, Reebok, Nike, Puma and Vans. The person who wears Puma shoes does not uses Facebook. Parmish wear Nike shoes and uses LinkedIn app. Anil who wear Adidas shoes but neither uses Facebook nor Twitter. Ishan neither wear Vans nor Puma shoes but he uses Twitter app. The person who uses WhatsApp doesn’t wear Adidas shoes. Bhagat uses Facebook app. Deepak wear which shoes brand, and also determine who uses Instagram?