Bissoy.com
Doctors Medicines MCQs Q&A

How many times do we have to calculate for Pressure drop in a Shell and Tube Heat Exchanger?

How many times do we have to calculate for Pressure drop in a Shell and Tube Heat Exchanger? Correct Answer 2

For a Shell and Tube HE, we have to calculate pressure drop twice, once for the tube to check whether the equipment can handle that pressure. Similarly, the second time for the shell side.

Related Questions

Plate type heat exchangers have less surface area as compared to a similar Shell and Tube heat exchanger. A Shell and Tube Heat Exchanger of equivalent area weigh six-seven times less than a Plate Type heat exchanger.
A single pass shell and tube heat exchanger, consisting of a bundle of 100 tubes (inner diameter 25 mm and thickness 2 mm) is used for heating 28 kg/s of water from 25 degree Celsius to 75 degree Celsius with the help of a steam condensing at atmospheric pressure on the shell side with condensing heat transfer coefficient 5000 W/m2 degree. Make calculation for overall heat transfer coefficient based on the inner area. Take fouling factor on the water side to be 0.002 m2 degree/W per tube and neglect effect of fouling factor on the shell side and thermal resistance of the tube wall
Simplify the value of $$\frac{{{\text{0}}{\text{.9}} \times {\text{0}}{\text{.9}} \times {\text{0}}{\text{.9 + 0}}{\text{.2}} \times {\text{0}}{\text{.2}} \times {\text{0}}{\text{.2 + 0}}{\text{.3}} \times {\text{0}}{\text{.3}} \times {\text{0}}{\text{.3}} - {\text{3}} \times 0.9 \times {\text{0}}{\text{.2}} \times {\text{0}}{\text{.3}}}}{{{\text{0}}{\text{.9}} \times {\text{0}}{\text{.9 + 0}}{\text{.2}} \times {\text{0}}{\text{.2 + 0}}{\text{.3}} \times {\text{0}}{\text{.3}} - 0.9 \times {\text{0}}{\text{.2}} - {\text{0}}{\text{.2}} \times {\text{0}}{\text{.3}} - 0.3 \times 0.9}} = ?$$
Air is to be heated by condensing steam. Two heat exchangers are available (i) a shell and tube heat exchanger and (ii) a finned tube heat exchanger. Tube side heat transfer area are equal in both the cases. The recommended arrangement is
$$\frac{{38 \times 38 \times 38 + 34 \times 34 \times 34 + 28 \times 28 \times 28 - 38 \times 34 \times 84}}{{38 \times 38 + 34 \times 34 + 28 \times 28 - 38 \times 34 - 34 \times 28 - 38 \times 28}}$$            is equal to = ?
Steam is to be condensed in a shell and tube heat exchanger, 5 m long with a shell diameter of 1 m. Cooling water is to be used for removing the heat. Heat transfer co-efficient for the cooling water, whether on shell side or tube side is the same. The best arrangement is
In a shell and tube heat exchanger, putting a longitudinal baffle across the shell, forces the shell side fluid to pass __________ through the heat exchanger.
In a counter flow heat exchanger, water flowing through a tube of 10 cm inner diameter is heated by steam condensing on the outside of the tube. The convective film coefficient on the water and steam side are estimated to be 12000 and 20000 k J/m2 hr degree. Neglecting tube thickness and its resistance to heat flow, workout the overall heat transfer coefficient for the heat exchanger
The advantage of using a 1 - 2 shell and tube heat exchanger over a 1 - 1 shell and tube heat exchanger is
Consider we have a Double Pipe Heat Exchanger, with the inner tube of Outer diameter 20mm (thickness 2mm) and outer tube of inner diameter 30mm. We have two fluids A & B, we desire to have their flow rates as 15 Kg/s and 21 Kg/s respectively. Calculate the convective heat transfer coefficient from tube to annulus side. (Given Nusselt number on tube side = 496 and K = 15W/mK)