Bissoy.com
Doctors Medicines MCQs Q&A

_________ is the process of two stage sulfite process with a mild sulfite stage followed by an acid sulfite stage to give a pulp with maximum yield.

_________ is the process of two stage sulfite process with a mild sulfite stage followed by an acid sulfite stage to give a pulp with maximum yield. Correct Answer Stora

Stora is the process of two stage sulfite process with a mild sulfite stage followed by an acid sulfite stage.

Related Questions

In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.
Measurement of KLa in a bioreactor can be carried out by sodium sulfite oxidation method, that is, based on the oxidation of sodium sulfite to sodium sulfate in the presence of a catalyst (Cu++ or Co++). In a typical experiment, a laboratory fermenter was filled with 5 liter of 0.5 M sodium sulfite solution containing 0.003 M Cu++ ions and the air was sparged in. After 10 min, the air flow was stopped and a 10 mL sample was taken and titrated. The concentration of sodium sulfite in the sample was found to be 0.20 M. The oxygen uptake rate for this aerated system will work out to be
Identify the correct statements from the following:
P. 0.2% yield strength of a material implies 0.2% of the yield strength.
Q. Von-Misses yield criterion implies that yielding occurs when the distortion energy reaches a critical value.
R. Radius of the cylinderical Von-Misses yield surface increases as the grain, size of a single phase material decreases.
S. Tresca's yield criterion gives a circular cylinderical surface in the space of the three principal stresses.
P, Q, R, Sand T are five crops that Babu grows. T is fast growing and more water demanding than R which gives more yield than T. P gives more yield than R and grows faster than Q. Q is more water demanding than T but is second lowest yielder, S is the slowest growing and least water demanding of all crops but gives highest yield. R is more water demanding and grows faster than P. Select the crop or crops that has/ have as many as crops that are more water demanding and as many as crops that give less yield than it. 
The S.P.C. techniques that are being introduced in the pulp mill would probably decrement process variability of the pulp going to the bleach plant from the pulp mill. What is the topic of discussion?
If this does not solve the problem then new S.P.C. techniques that are being introduced in the pulp mill would probably decrement process variability of the pulp going to the bleach plant from the pulp mill. What is the topic of discussion?
Read the given statements and conclusions carefully and choose which of the conclusions is logical in the context of the given statements. Statements: 1. All files are paper. 2. All paper is pulp. Conclusion: 1. All files are pulp. 2. Some pulp is paper.
Mechanical pulp is pulp produced by using only mechanical attrition to pulp lignocellulosic materials; no chemicals are used.
___________ decreases the strength of pulp yield, and are not ideal for dissolving pulp process.
If the specimen is deformed plastically beyond the yield stress in one direction, e.g., tension and then after unloading it is loaded in the opposite direction, e.g., compression, it is found that the yield stress is less than the original yield stress. This dependence of yield stress on direction loading is called ____________