Bissoy.com
Doctors Medicines MCQs Q&A

The inlet speeds of coal dust and oxygen blown into gasification chamber are _________ than the velocity of flame propagation

The inlet speeds of coal dust and oxygen blown into gasification chamber are _________ than the velocity of flame propagation Correct Answer Higher

The inlet speeds of coal dust and oxygen must be higher than velocity of flame propagation. Then at the base of chamber ash falls into water seal and hot gases escape through top of the chamber.

Related Questions

In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. was achieved. _________ you wanted the flame
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. and __________ a small circular flame
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. would spread _________ a loud noise.
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. had to be _________ opened to reduce
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. was achieved. _________ you wanted the flame
Biomass gasification is considered to be one of the sustainable solutions to the power crisis in India, In this context, which of the following statements is/are correct? 1. Coconut shells, groundnut shells and rice husk can be used in biomass gasification. 2. The combustible gases generated from biomass gasification consist of hydrogen and carbon dioxide only. 3. The combustible gases generated from biomass gasification can be used for direct heat generation but not in internal combustion engines. Select the correct answer using the codes given below:
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. and __________ a small circular flame
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. below would be __________ pressure
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. would spread _________ a loud noise.
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. had to be _________ opened to reduce