Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

In a wetted-wall tower, an air-H2S mixture is flowing by a film of water which is flowing as a thin film down a vertical plate. The H2S is being absorbed from the air to the water at a total pressure of 1.50 atm abs and 30oC. The value of kc of 9.567×10-4 m/s has been predicted for the gas-phase mass-transfer coefficient. At a given point the mole fraction of H2S in the liquid at the liquid-gas interface is 2.0×10-5 and pA of H2S in the gas is 0.05 atm. The Henry’s law equilibrium relation is pA(atm) = 609xA (mole fraction in liquid). Calculate the rate of absorption of H2S.
A reactor is supplied with two steams with equal flow rates, stream-1 containing 75% SO2, 25% N2 and stream-2 containing pure H2S, if the product has 1200 grams of S, and the ratio of H2S to H2O is 5 and the ratio of SO2 to H2S is 2, what is the rate of streams?
A reactor is supplied with two steams with equal flow rates, stream-1 containing 75% SO2, 25% N2 and stream-2 containing pure H2S, if the product has 1200 grams of S, and the ratio of H2S to H2O is 5 and the ratio of SO2 to H2S is 2, what fraction of limiting reagent is converted into product?
A reactor is supplied with two steams with equal flow rates, stream-1 containing 75% SO2, 25% N2 and stream-2 containing pure H2S, if the product has 1200 grams of S, and the ratio of H2S to H2O is 5 and the ratio of SO2 to H2S is 2, how many moles of water are produced?
A reactor is supplied with two steams with equal flow rates, stream-1 containing 75% SO2, 25% N2 and stream-2 containing pure H2S, if the product has 1200 grams of S, and the ratio of H2S to H2O is 5 and the ratio of SO2 to H2S is 2, what fraction of excess reagent is converted into product?
A reactor is supplied with two steams with equal flow rates, stream-1 containing 75% SO2, 25% N2 and stream-2 containing pure H2S, if the product has 1200 grams of S, and the ratio of H2S to H2O is 5 and the ratio of SO2 to H2S is 2, what is percentage of Sulfur in the product?
A solid-oxide fuel cell is fed with carbon monoxide and reacts with air to produce CO2. This reaction will produce 2 electrons which are used to power an electric circuit external to the fuel cell. The reaction equation is shown below: 2CO(g) + O2(g) -> 2CO2(g) ΔHr° = -565.96 kJ/mol This reaction does not occur for other types of fuel cells which use a catalyst, such as polymerelectrolyte membrane or phosphoric-acid fuel cells. The presence of carbon monoxide on the anode side of these types of fuel cells will cause catalyst poisoning, reducing the efficiency and voltage of the fuel cell. Determine the rate of enthalpy change for a carbon dioxide production rate of 208 mol/hr. The extent of the reaction occurring in the fuel cell can be obtained by the following equation: where:
In a village 50% of the villagers produce rice, 40% of the villagers produce apples and 50% of the villagers produce vegetables, 20% of the villagers produce rice and apples both, 25% of the villagers produce apples and vegetables both, 20% of the villagers produce rice and vegetables both and 10% of the villagers produce all three. Find the percentage of villagers who do not produce anything.
In vapor compression cycle having dry saturated vapor at the end of compression the refrigeration effect is given by? H1 – Enthalpy of vapor before compression H4 – Enthalpy of vapor before entering evaporator H2 – Enthalpy of vapor after compression
Which of the following statements is/are true or false? Statements : A) H2S burns in air to give H2O and SO2 B) The decomposition of Ferrous Sulphate into Fe2O3, SO2 and SO3 occurs in the presence of heat.