Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Low-density Polyethylene shows a higher degree of crystallinity than High-density Polyethylene.
Let D be a simple graph on 10 vertices such that there is a vertex of degree 1, a vertex of degree 2, a vertex of degree 3, a vertex of degree 4, a vertex of degree 5, a vertex of degree 6, a vertex of degree 7, a vertex of degree 8 and a vertex of degree 9. What can be the degree of the last vertex?
Study the following statements.i) The displacement method is more useful when degree of kinematic indeterminacy is greater than the degree of static indeterminacy.ii) The displacement method is more useful when degree of kinematic indeterminacy is less than the degree of static indeterminacy.iii) The force method is more useful when degree of static indeterminacy is greater than the degree of kinematic indeterminacy.iv) The force method is more useful when degree of static indeterminacy is less than the degree of kinematic indeterminacy.The correct answer is
A map shows the elevations of Darjeeling, Gangtok, Kalimpong, Pelling, and Siliguri. Kalimpong is at a lower elevation than Gangtok, Pelling is at a lower elevation than Gangtok. Pelling is at a higher elevation than Siliguri. Darjeeling is at a higher elevation than Gangtok. Which of the following statements can be inferred from the paragraph above? i. Pelling is at a higher elevation than Kalimpong ii. Kalimpong is at a lower elevation than Darjeeling iii. Kalimpong is at a higher elevation than Siliguri iv. Siliguri is at a lower elevation than Gangtok
Seven boys are living in different buildings at a different height. Abir, Ayush, Anand, Ajay, Alok, Nakul and Nandu. Ayush is living on a higher floor than Nakul and Abir. Abir lives on a higher floor than Nakul and Alok is on the lowest floor. Nandu lives in a lower height than Ayush but higher than Abir and Nakul. Ajay is the one who lives lower than Nakul. Anand lives on a higher floor than Ayush.  Find whose building is the highest one?
Which statements are CORRECT? I. In early 1930’s Nylon was prepared from coal, water and air. II. Nylon was the first fully synthetic fibre. III. Nylon fibre was strong, elastic and light.
Which statements are CORRECT? I. In early 1930s Nylon was prepared from coal, water and air. II. Nylon was the first fully synthetic fibre. III. Nylon fibre was strong, elastic and light.
Which statements are correct?
1. In early 1930's Nylon was prepared from coal, water and air.
2. Nylon was the first synthetic fibre.
3. Nylon fibre was strong elastic and light.
The rear window of an automobile is made of thick glass i.e. AB = 5 mm and thermal conductivity is 0.8 W/m degree. To defrost this window, a thin transparent film type heating element has been fixed to its inner surface. For the conditions given below, determine the electric power that must be provided per unit area of window if a temperature 5 degree Celsius is maintained at its outer surface. Interior air temperature and the corresponding surface coefficient are 20 degree Celsius and 12 W/m2 degree. Surrounding air temperature and the corresponding surface coefficient are – 15 degree Celsius and 70 W/m2 degree. Electric heater provides uniform heat flux
A water line is buried underground in dry soil that has an assumed initial temperature of 4.5 degree Celsius. The pipe may have no flow through it for long period of time, yet it will not be drained in order that no freezing occurs, the pipe must be kept at a temperature not lower than 0 degree Celsius. The pipe is to be designed for a 30 hour period at the beginning of which the soil surface temperature suddenly drops to – 17 degree Celsius. Workout the minimum earth covering needed above the water pipe so as to prevent the possibility of freezing during 36 hour cold spell. The soil in which the pipe is buried has the following properties Density = 640 kg/m3 Specific heat = 1843J/kg degree Thermal conductivity = 0.345 W/m degree