Bissoy.com
Doctors Medicines MCQs Q&A

Stress-corrosion cracking occurs due to the simultaneous presence of tensile stress and a specific corrosive medium.

Stress-corrosion cracking occurs due to the simultaneous presence of tensile stress and a specific corrosive medium. Correct Answer True

Stress–corrosion cracking occurs due to the simultaneous presence of tensile stress either is caused by residual or external stress and a specific corrosive medium. Residual stress is caused due to welding, cold working, etc.

Related Questions

There are two medium L1 and L2 of refractive index n1 and n2 respectively (n2  > n1 > 1). In which of the following condition the total internal reflection may occur: a) When the light travel from medium L1 to medium L2. b) When the light travels from medium L2 to medium L1. c) When the light travel from medium L1 to air. d) When the light travels from air to medium L2. Which of the following statement is correct?
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
Two statements are followed by three Conclusions I, II and III. You have to consider the statements to be true, even if they seem to be at variance from commonly known facts. You are to decide which of the given conclusions can definitely be drawn from the given statements and indicate your answer accordingly. Statements: I. Political parties that opposed simultaneous polls before the Law Commission mostly cited federalism, Constitution and impracticability for their opposition, but Goa Forward Party chose coconuts to drive home its point against the proposal of ‘One Nation, One Election'. II. The regional party that is part of the BJP-led Goa government cited coconut, its party symbol, to argue that regional issues will go unaddressed in the noise of simultaneous polls. Conclusions: I. To buttress its reasoning, Goa Forward Party representative cited the party's history and struggle in protesting against cutting down of coconut trees in Goa before it came to power with ally BJP in March 2017. II. The party had protested against the BJP government's decision to amend rules to simplify the procedure of cutting down coconut trees by removing it from the list of trees. III. The commission held talks with political parties on the proposal of simultaneous elections.
A wall bracket is attached to the wall by means of 2 identical bolts, one at A and one at B. The force of 20kN acts at a distance of 400mm. Bolt A lies at a distance of 50mm from axis of tilt and bolt B 500mm. Allowable shear stress in the bolts is 100N/mm² and tensile is 40N/mm². Find the radius of Mohr circle which can be made from the shear stress and tensile stress acting on bolts.(Consider bolt under max stress and area of bolt is A)
A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The minimum normal stress will be
A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum shear stress will be
Tresca or maximum-shear stress criteria assumes that yielding occurs when the maximum shear stress reaches a value of the shear stress in the uniaxial tension test. Assume the principal stress being σ1, σ2, σ3 where σ1 is largest, and σ3 is the smallest principal stresses. Find the value of minimum shear stress to cause yielding, given that yield stress in tension is equal to σo?
Which of the following stresses are associated with the tightening of a nut on a bolt? P. Tensile stress due to the streching of bolt Q. Bending stress due to the bending of bolt R. Torsional shear stress due to frictional resistance between the nut and the bolt Select the correct answer using the codes given below.
Which of the following statements regarding stress related factors is/are true and false?
1. Burnout Stress Syndrome (BOSS) is a debilirating psychological condition brought about by unrelieved work stress.
2. 'Good' and 'bad' stresses are also referred to as 'Distress' and 'Eustress' respectively.
3. It is natural and healthy to maintain optimal level of stress.
4. Rustout Stress Syndrome (ROSS) is indicative of stress overload.
5. Anxiety is a state of emotional tension characterised by Apprehension, fearfulness, and psychic pain.