Bissoy.com
Doctors Medicines MCQs Q&A

The forming dies of swaging machine are generally arranged in an eccentric manner.

The forming dies of swaging machine are generally arranged in an eccentric manner. Correct Answer False

In the swaging process, the forming dies of the swaging machine are generally arranged concentrically around the material rod. The swaging dies operate with high frequency radial motions and with small strokes. The stroke frequencies commonly range from 1500 to 10000 per minute which basically depends upon the size of machine or equipment.

Related Questions

The virtue or equivalent eccentric for the Meyer’s expansion valve is defined as an eccentric having such a length and angle of advance that will cause cut-off to take place at the same position, as is caused by the combined effect of main eccentric and expansion eccentric.
In the metal forming operations, forming dies are also called as progressive dies.
Rotary swaging process is also called as incremental forming or oscillating forming process.
Consider the following in case of high-energy forming processes: 1. The evacuation between die and blank in explosive forming is done by a vacuum pump. 2. The pressure waves produced in water in explosive forming deform the blank to the die shape. 3. The electrohydraulic forming makes use of discharge of large amount of electrical energy used in a capacitor bank. 4. In Petroforge, the piston is moved by combustion of fuel moving at the rate of 150-200 m/s. Which of the above are correct?
In a press there are three types of printing machines A, B, and C. Machine A can print ten thousand pages in 8 hours, machine B can do the same task in 10 hours, and machine C can do the same task in 12 hours. All three machines start the task at 9∶00 a.m. Machine A breaks down at 11∶00 a.m. and machines B and C continue working. At 12∶00 noon machine B also breaks down and machine C alone has to complete the remaining task. What is the approximate time of completion of the task?
Suppose we want to design a synchronous circuit that processes a string of 0’s and 1’s. Given a string, it produces another string by replacing the first 1 in any subsequence of consecutive 1’s by a 0. Consider the following example. Input sequence: 00100011000011100 Output sequence: 00000001000001100 A Mealy Machine is a state machine where both the next state and the output are functions of the present state and the current input. The above mentioned circuit can be designed as a two-state Mealy machine. The states in the Mealy machine can be represented using Boolean values 0 and 1. We denote the current state, the next state, the next incoming bit, and the output bit of the Mealy machine by the variables s, t, b and y respectively. Assume the initial state of the Mealy machine is 0. What are the Boolean expressions corresponding to t and y in terms of s and b ?
Consider the following statements regarding milling machine: 1. In the vertical milling machine, it Is possible to machine dovetail recesses. 2. In universal milling machine, the worktable can be swivelled. 3. In rotary milling machine, motion imparted to work is rotary. 4. Planer milling machine is provided with several horizontal and vertical heads. Which of the above statements are correct?
A relative rotational motion between dies and materials is provided to prevent the formation of burrs during the process of swaging.
Frictional wearing of dies is the major problem in the process of rotary swaging.
In a steam engine, one method of obtaining the earlier cut-off with a simple slide valve is by increasing the angle of advance of the eccentric while the throw of the eccentric, steam lap and exhaust lap are kept constant. This method will